MERCEDES TRUCK ACTROS 3348 16L V8 350kW/469HP TEMIC — ECU TEMIC TEMIC PLD

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 7 programinės įrangos versijos

Gaukite failą šiai transporto priemonei

Pirkti failą (originalų arba perprogramuotą)Užsiregistruokite mastertuningfile.com ir užsisakykite failą

Esate servisas ar derintojas?

Transporto priemonės duomenys

Markė	MERCEDES TRUCK
Modelis	ACTROS
Variklis	3348 16L V8 350kW/469HP TEMIC
Serijinė galia	476 CV / 35 kW
Darbinis tūris	12000 cc
Kuras	Diesel sovralimentato
Transporto priemonės tipas	Tir

ECU

Gamintojas	TEMIC
Modelis	TEMIC PLD
Atmintis / EPROM	29F200 PSOP44 2Mbit - Flash 128K x 16 (256K x 8)

Galimos derinimo operacijos / parinktys:

Max threshold air mass flow throught compressor
Boost pressure limiter
Protection for engine overheating
Protection for engine overheating 2
Basic torque management at engine cranking
Engine idle vs. ECT sensor
Injection angle
Injection angle 2
Injection angle - correction
Injection delivery angle
Smoke limiter
Maximum indicated torque
Max torque profile

Programinės įrangos identifikatoriai (7)

Aparatinės įrangos Nr.	Programinės įrangos Nr. (lustas)	Versija	Atnaujinimo programinė įranga	ECU
—	G51	1.00.013	—	TEMIC TEMIC PLD
—	E51	1.54.124	—	TEMIC TEMIC PLD
—	60A	1.54.008	—	TEMIC TEMIC PLD
—	56E	1.54.017	—	TEMIC TEMIC PLD
—	23E	1.54.009	—	TEMIC TEMIC PLD
—	06A	1.54.007	—	TEMIC TEMIC PLD
—	10B	1.54.014	—	TEMIC TEMIC PLD

ECU pastabos

Original EPROM PSOP 44 pins 29F200BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.

This Setting File can be used for serial system NewGenius.

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it. On this epron can be set a KEY.

Gaukite failą šiai transporto priemonei

Pirkti failą (originalų arba perprogramuotą)Užsiregistruokite mastertuningfile.com ir užsisakykite failą Esate servisas ar derintojas?Siūlykite šias paslaugas patys: aktyvuokite savo TuningFile platformą

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy

The Genius OBD + Bench € 2.500 Buy

Kiti MERCEDES TRUCK

1853
15L V8 390kW/523HP MS5 ACTROS
1843 12L V6 315kW/422HP TEMIC ACTROS
1848 16L V8 350kW/473HP TEMIC ACTROS
1853 16L V8 390kW/523HP TEMIC ACTROS
1857 16L V8 419kW/565HP TEMIC 2053
22.6L V12 390kW/523HP MS5 ACTROS
1831 12L V6 235kW/315HP TEMIC ACTROS
4143 12L V6 320kW/429HP TEMIC 2638
18L V10 280kW/375HP MS5 1844
10.9L V6 324kW/434HP MS5

→ Visos ECU MERCEDES TRUCK