LOTUS EXIGE S2 S 1.8L 16V TOYOTA 163kW/219HP EFI T4E

ECU EFI T4E · 222 CV (163 kW) · 1800 cc · Benzina aspirato

ECU duomenų bazėLOTUS › LOTUS EXIGE S2 S 1.8L 16V TOYOTA 163kW/219HP EFI T4E

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 4 programinės įrangos versijos

Transporto priemonės duomenys

MarkėLOTUS
ModelisEXIGE S2
VariklisS 1.8L 16V TOYOTA 163kW/219HP EFI T4E
Serijinė galia222 CV / 163 kW
Darbinis tūris1800 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasEFI
ModelisT4E
Atmintis / EPROMMICRO BGA CON FLASH A BORDO 512K - 80000

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Camshaft maximum lift high load
  • Camshaft maximum lift low load
  • Lambda correction
  • Main injection
  • Fan activation threshold stage 1
  • Fan activation threshold stage 2
  • Fan activation threshold with engine off
  • Throttle angle limitation
  • VANOS inlet CAM at part load
  • VANOS inlet CAM at full load
  • Volumetric efficiency

Programinės įrangos identifikatoriai (4)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
A128E6009F K0404A128E6010H 1.85.008 EFI T4E
A128E6009F K0404C128E6010H 1.85.021 EFI T4E
A128E6009F K0404B128E6010H 1.85.002 EFI T4E
ALS3M0240J K0412C128E6010H 1.85.006 EFI T4E

ECU pastabos

MICRO MPC563 Warning! Lambda correction map, it is necessary to reduce the value to enrich the mixture. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata Warning! to properly exclude the lambda probe 2, after running the patch LAM2, you must disconnect the connector of lambda probe 2 after the cat.

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop