JAGUAR XF (X260) 3.0L V6 24V SC 250kW/335HP MED17.8.31

ECU BOSCH MED17.8.31 · 340 CV (25 kW) · 3000 cc · Benzina sovralimentato

ECU duomenų bazėJAGUAR › JAGUAR XF (X260) 3.0L V6 24V SC 250kW/335HP MED17.8.31

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 13 programinės įrangos versijos

Transporto priemonės duomenys

MarkėJAGUAR
ModelisXF (X260)
Variklis3.0L V6 24V SC 250kW/335HP MED17.8.31
Serijinė galia340 CV / 25 kW
Darbinis tūris3000 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisMED17.8.31
Atmintis / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Gearbox maximum torque allowed
  • High pressure fuel pump setpoint
  • High pressure fuel pump setpoint 2
  • High fuel pressure pump limit for ECT sensor
  • Injection 1
  • Injection 2
  • Torque limiter 2
  • Torque limiter 3
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM limit for EOT sensor
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • MAF sensor calibration
  • Maximum indicated torque
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Max torque profile
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Driver torque request 2
  • Driver torque request for high speed
  • Throttle angle management

Programinės įrangos identifikatoriai (13)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
CPLA-12B684-YE 1.94.002HX73-14C204-TTD BOSCH MED17.8.31
CPLA-12B684-YE 1.94.002FX23-14C204-JAE BOSCH MED17.8.31
CPLA-12B684-YE 1.94.002FX23-14C204-TTD BOSCH MED17.8.31
CPLA-12B684-YE 1.94.004DX23-14C204-TCE BOSCH MED17.8.31
CPLA-12B684-YE 1.94.004DX23-14C204-TTH BOSCH MED17.8.31
CPLA-12B684-YE 1.94.002HX73-14C204-TTC BOSCH MED17.8.31
CPLA-12B684-YE 1.94.002DX23-14C204-JAD BOSCH MED17.8.31
CPLA-12B684-YE 1.94.002GX63-14C204-JAC BOSCH MED17.8.31
CPLA-12B684-YE 1.94.004DX23-14C204-JAG BOSCH MED17.8.31
CPLA-12B684-YE 1.94.003FX23-14C204-TTE BOSCH MED17.8.31
CPLA-12B684-YE 1.94.007GX63-14C204-CAD BOSCH MED17.8.31
CPLA-12B684-YE 1.94.003GX63-14C204-TAE BOSCH MED17.8.31
CPLA-12B684-YF 1.94.002HX73-14C204-TTD BOSCH MED17.8.31

ECU pastabos

MICRO Infineon Tricore TC1797 This Setting File can be used for serial system NewGenius.