JAGUAR F-TYPE (X152) 3.0L 24V V6 SC S 280kW/376HP MED17.8.31

ECU BOSCH MED17.8.31 · 381 CV (28 kW) · 3000 cc · Benzina sovralimentato

ECU duomenų bazėJAGUAR › JAGUAR F-TYPE (X152) 3.0L 24V V6 SC S 280kW/376HP MED17.8.31

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 24 programinės įrangos versijos

Transporto priemonės duomenys

MarkėJAGUAR
ModelisF-TYPE (X152)
Variklis3.0L 24V V6 SC S 280kW/376HP MED17.8.31
Serijinė galia381 CV / 28 kW
Darbinis tūris3000 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisMED17.8.31
Atmintis / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • High pressure fuel pump setpoint
  • High pressure fuel pump setpoint 2
  • High fuel pressure pump limit for ECT sensor
  • Maximum injection quantity
  • Injection 1
  • Injection 2
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter 4
  • Torque limiter 6
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM Limiter 2
  • RPM limit for EOT sensor
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Maximum indicated torque
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Max torque profile
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Throttle angle management

Programinės įrangos identifikatoriai (24)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
CPLA-12B684-YE 1.94.002EX53-14C204-UAJ BOSCH MED17.8.31
CPLA-12B684-YE 1.94.002FX53-14C204-TCD BOSCH MED17.8.31
CPLA-12B684-YE 1.94.002EX53-14C204-UTK BOSCH MED17.8.31
CPLA-12B684-YE 1.94.003EX53-14C204-UAK BOSCH MED17.8.31
CPLA-12B684-YE 1.94.004EX53-14C204-UCH BOSCH MED17.8.31
CPLA-12B684-YE 1.94.002EX53-14C204-UCJ BOSCH MED17.8.31
CPLA-12B684-YE 1.94.010EX53-14C204-UTD BOSCH MED17.8.31
CPLA-12B684-YE 1.94.017FX23-14C204-JTC BOSCH MED17.8.31
CPLA-12B684-YE 1.94.012EX53-14C204-EAE BOSCH MED17.8.31
CPLA-12B684-YE 1.94.004EX53-14C204-TCH BOSCH MED17.8.31
CPLA-12B684-YE 1.94.004HK83-14C204-CEB BOSCH MED17.8.31
CPLA-12B684-YE 1.94.006EX53-14C204-UTJ BOSCH MED17.8.31
CPLA-12B684-YE 1.94.002EX53-14C204-UEJ BOSCH MED17.8.31
GX53-12B684-AA 1.94.002GX53-14C204-UEB BOSCH MED17.8.31
GX53-12B684-AA 1.94.008GX53-14C204-UTD BOSCH MED17.8.31
GX53-12B684-AA 1.94.002GX53-14C204-UCB BOSCH MED17.8.31
GX53-12B684-AA 1.94.002GX53-14C204-CTE BOSCH MED17.8.31
GX53-12B684-AA 1.94.007GX53-14C204-UTE BOSCH MED17.8.31
GX53-12B684-AA 1.94.004GX53-14C204-AAE BOSCH MED17.8.31
GX53-12B684-AA 1.94.003GX53-14C204-UEC BOSCH MED17.8.31
GX53-12B684-AB 1.94.003JX53-14C204-CTC BOSCH MED17.8.31
GX53-12B684-AB 1.94.002JX53-14C204-UTD BOSCH MED17.8.31
HPLA-14C568-TB 1.94.002LX53-14C570-CHB BOSCH MED17.8.32
HPLA-14C568-TB 1.94.003LX53-14C570-UHB BOSCH MED17.8.32

Techninės pastabos apie automobilį

ECU located in the engine bay to the right or left of the engine block, visible or hidden by a plastic lid. Difficulty:easy
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU pastabos

MICRO Infineon Tricore TC1797 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1797 This Setting File can be used for serial system NewGenius.