HYUNDAI ACCENT MK3 1.6L 16V CVVT 94kW/126HP M7.9.8

ECU BOSCH M7.9.8/MG7.9.8 · 128 CV (94 kW) · 1600 cc · Benzina aspirato

ECU duomenų bazėHYUNDAI › HYUNDAI ACCENT MK3 1.6L 16V CVVT 94kW/126HP M7.9.8

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 2 programinės įrangos versijos

Transporto priemonės duomenys

MarkėHYUNDAI
ModelisACCENT MK3
Variklis1.6L 16V CVVT 94kW/126HP M7.9.8
Serijinė galia128 CV / 94 kW
Darbinis tūris1600 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisM7.9.8/MG7.9.8
Atmintis / EPROMMICRO ST - 6656 Kbit

Galimos derinimo operacijos / parinktys:

  • Advance at idle speed
  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • RPM Limiter
  • Speed limiter
  • Air mass flow
  • Injection correction Lambda sensor 1

Programinės įrangos identifikatoriai (2)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
9030930952GMC_7G6CES1_5000 1.14.001 BOSCH M7.9.8/MG7.9.8
9030930959GMC_7R6CFS1_5000 1.14.002 BOSCH M7.9.8/MG7.9.8

Techninės pastabos apie automobilį

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU pastabos

Microprocessor ST10F275 ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! To work on this ECU you can use NewTrasdata

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop