Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 13 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | HONDA |
| Modelis | CIVIC (FC/FK) MK10 |
| Variklis | 1.0L 12V i-VTEC TURBO 95kW/127HP MED17.9.3 |
| Serijinė galia | 129 CV / 95 kW |
| Darbinis tūris | 1000 cc |
| Kuras | Benzina sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | MED17.9.3 |
| Atmintis / EPROM | MICRO ST TRICORE - 32768 - 400000 |
Galimos derinimo operacijos / parinktys:
- Absolute boost limit
- Maximum air charge for overboost protection with turbocharger fault
- Base timing
- Minimum advance allowed
- Minimum advance allowed 2
- Optimal spark timing/MBT
- Boost pressure limiter
- Desired engine load calculation
- Lambda correction for engine temperature after starting
- Compression ratio for turbocharger protection
- Compression ratio for turbocharger protection 2
- Compression ratio limiting for compressor depending on IAT sensor
- Desired pressure ratio
- Max accepted exhaust gas temperature value after turbine
- Max accepted exhaust gas temperature at exhaust manifold
- Exhaust gas temperature
- Exhaust gas temperature threshold for component protection
- Maximum value for EKP (electric fuel pump)
- Engine air charge correction for IAT sensor
- Engine air charge correction due to knocking
- Characteristic line correction factor for pressure ratio for turbocharger overspeed protection
- Max torque correction factor for ECT sensor
- Factor for reducing maximum filling
- Engine filling reduction factor for component protection
- Engine idle vs. ECT sensor
- Maximum value for HDP (high pressure fuel pump)
- High pressure fuel pump setpoint
- High fuel pressure pump limit for ECT sensor
- Intake pressure protection
- Boost pressure deviation limits for basic charge air pressure
- Lambda enrichment for components protection
- Lambda minimum value for components protection
- Lambda value for components protection activation
- Torque limiter at high EGT
- Lambda efficiency
- RPM Limiter
- RPM Limiter 2
- RPM limiter 4
- RPM limiter in Park position
- RPM limiter - R
- Engine speed limit temperature based
- RPM limit for ECT sensor
- RPM limit for EOT sensor
- Minimum limitation lambda sensor
- Lambda driver wish
- Knock detection factor
- Speed limiter
- Maximum indicated torque
- Boost pressure minimal delta
- Throttle air mass flow calculation
- Manifold absolute pressure time delay
- Characteristic manifold absolute pressure time constant of the LRS
- Maximum negative deviation for boost overcharge
- Minimum engine air charge value
- Max torque profile
- Max torque profile 2
- Max torque profile in Sport mode
- Optimal engine moment
- Power limit torque table
- Relative permissible torque from the pedal position in torque limitation
- % relative air filling limit depending on IAT
- Driver torque request
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for the 7th gear selected
- Torque limiter for the 8th gear selected
- Torque limiter for the 9th gear selected
- Torque limiter for for reverse gear
- Throttle angle management
- Turbocharger volumetric efficiency
- Turbocharger volumetric efficiency 2
- Variable valve timing - inlet
- Variable valve timing - outlet
Programinės įrangos identifikatoriai (13)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
| — | 378205AZG160M6 |
1.91.003 | 37805-5AZ-G160 |
BOSCH MED17.9.3 |
| — | 378205AZG130M6 |
1.91.003 | 37805-5AZ-G130 |
BOSCH MED17.9.3 |
| — | 378206P7H540M6 |
1.91.015 | 37805-6P7-H54 |
BOSCH MED17.9.3 |
| — | 378205AZG240M6 |
1.00.006 | 37805-5AZ-G24 |
BOSCH MED17.9.3 |
| — | 378205AKT020M6 |
1.91.007 | 37805-5AK-T020 |
BOSCH MED17.9.3 |
| — | 378205AZG550M6 |
1.91.008 | 37805-5AZ-G550 |
BOSCH MED17.9.3 |
| — | 378205AZG140M6 |
1.91.003 | 37805-5AZ-G140 |
BOSCH MED17.9.3 |
| — | 378205AZG040M6 |
1.91.004 | 37805-5AZ-G040 |
BOSCH MED17.9.3 |
| — | 378205AZE840M6 |
1.91.003 | 37805-5AZ-E840 |
BOSCH MED17.9.3 |
| — | 378205AZG230M6 |
1.91.008 | 37805-5AZ-G23 |
BOSCH MED17.9.3 |
| — | 378205AZG740M6 |
1.91.009 | 37805-5AZ-G740 |
BOSCH MED17.9.3 |
| — | 378205AZK020M6 |
1.91.007 | 37805-5AZ-K020 |
BOSCH MED17.9.3 |
| — | 378205AZE150M6 |
1.91.004 | 37805-5AZ-E150 |
BOSCH MED17.9.3 |
Techninės pastabos apie automobilį
ECU located in the engine bay behind/close to the battery. Difficulty: easy
ECU pastabos
MICRO Infineon Tricore TC1793 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius.
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU