FORD TRANSIT Mk8 1.0L 16V Ecoboost 75kW/100HP MG1CS016

ECU BOSCH MG1CS016 · 101 CV (75 kW) · 1000 cc · Benzina sovralimentato

ECU duomenų bazėFORD › FORD TRANSIT Mk8 1.0L 16V Ecoboost 75kW/100HP MG1CS016

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 5 programinės įrangos versijos

Transporto priemonės duomenys

MarkėFORD
ModelisTRANSIT Mk8
Variklis1.0L 16V Ecoboost 75kW/100HP MG1CS016
Serijinė galia101 CV / 75 kW
Darbinis tūris1000 cc
KurasBenzina sovralimentato
Transporto priemonės tipasLCV

ECU

GamintojasBOSCH
ModelisMG1CS016
Atmintis / EPROMMicro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 384Kbyte

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Max threshold air mass flow throught compressor
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Part pedal combustion load limit
  • Compressor pressure ratio limit for pumping and speed
  • Engine indicated torque at stoichiometric
  • Lambda enrichment - open loop
  • Max desired pressure ratio limit
  • Lambda driver wish
  • Lambda driver wish 2
  • Knock detection factor
  • Load limit at high effectiveness of LSPI mitigation
  • Load limit at low effectiveness of LSPI mitigation
  • Load limit at nominal effectiveness of LSPI mitigation
  • Maximum advance allowed
  • Intake manifold pressure
  • Maximum indicated torque
  • Maximum indicated torque for monitoring
  • Maximum indicated torque (overboost active)
  • Minimum indicated torque for monitoring
  • Max load
  • Max load at WOT
  • Maximum intake manifold pressure
  • Maximum throttle angle opening for a given RPM
  • Overall LSPI load limit
  • Percent accelerator pedal angle to desired throttle angle
  • Pressure ratio limit for overboost detection
  • Driver torque request for the transmission - 1st gear
  • Driver torque request for the transmission - 2th gear
  • Driver torque request for the transmission - 3th gear
  • Driver torque request for the transmission - 4th gear
  • Driver torque request for the transmission - 5th gear
  • Driver torque request for the transmission - 6th gear
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Max torque limitation in Neutral (N)
  • Torque limiter for for reverse gear
  • Max torque limitation with trailer - MT
  • Wastegate duty-cycle
  • Max tip at wastegate

Programinės įrangos identifikatoriai (5)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
JX6A-12B684-KAKV6A-12A650-AB 1.94.010LV6A-14C204-AC BOSCH MG1CS016
JX6A-12B684-KAKV6A-12A650-AB 1.94.007KV6A-14C204-XG BOSCH MG1CS016
JX6A-12B684-KAKV6A-12A650-AB 1.94.008LV6A-14C204-AE BOSCH MG1CS016
JX6A-12B684-KAKV6A-12A650-AB 1.94.007KV6A-14C204-XF BOSCH MG1CS016
JX6A-12B684-KAKV6A-12A650-AB 1.94.012KV6A-14C204-XE BOSCH MG1CS016

ECU pastabos

Micro Infineon Tricore TC275TP This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata