FORD TRANSIT Mk6 2.4L TD 88kW/118HP EFI WP.41/4

ECU DELPHI DCM3.1 · 120 CV (88 kW) · 2400 cc · Diesel sovralimentato

ECU duomenų bazėFORD › FORD TRANSIT Mk6 2.4L TD 88kW/118HP EFI WP.41/4

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 15 programinės įrangos versijos

Transporto priemonės duomenys

MarkėFORD
ModelisTRANSIT Mk6
Variklis2.4L TD 88kW/118HP EFI WP.41/4
Serijinė galia120 CV / 88 kW
Darbinis tūris2400 cc
KurasDiesel sovralimentato
Transporto priemonės tipasLCV

ECU

GamintojasDELPHI
ModelisDCM3.1
Atmintis / EPROM28F200 PSOP44 2Mbit - Flash 128K x16 (256K x 8)

Galimos derinimo operacijos / parinktys:

  • Injection correction
  • Torque limiter
  • Air mass flow

Programinės įrangos identifikatoriai (15)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1C1ALGPUPIAM3.HEX 1.34.015 DELPHI DCM3.1
1C1ANDPUPIAJ2.HEX 1.34.022 DELPHI DCM3.1
1C1ANDPUPIAJ2.HEX 1.34.014 DELPHI DCM3.1
1C1ANEPUPIAJ5.HEX 1.34.015 DELPHI DCM3.1
1C1ANEPUPIAJ5.HEX 1.34.019 DELPHI DCM3.1
1C1ANEPUPIAJ5.HEX 1.34.011 DELPHI DCM3.1
1C1ANEPUPIAJ5.HEX 1.00.014 DELPHI DCM3.1
1C1ANEPUPIAJ5.HEX 1.34.012 DELPHI DCM3.1
1C1ANFPUPIAJ6.HEX 1.34.009 DELPHI DCM3.1
2C1AFCPUQIAM3.HEX 1.34.012 DELPHI DCM3.1
3C11GDPURT2J1.HEX 1.34.005 DELPHI DCM3.1
5C11CAPURT2J3.HEX 1.34.005 DELPHI DCM3.1
YC1AAEPUPI6J2.HEX 1.34.016 DELPHI DCM3.1
1.34.008 FORD EFI WP.41
2C1AMBPUQR3J0.HE 1.34.009YC1A_12K532_BP FORD EFI WP.41

Techninės pastabos apie automobilį

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU pastabos

Original EPROM PSOP 44 pin 28F200. In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY.
Original EPROM PSOP 44 pin 28F200. In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system NewGenius.

Galimi papildomi moduliai

→ See all add-on modules on the shop