FORD PUMA Mk2 1.5L ST 12V Ecoboost 149kW/197HP MG1CS016

ECU BOSCH MG1CS016 · 203 CV (149 kW) · 1500 cc · Benzina sovralimentato

ECU duomenų bazėFORD › FORD PUMA Mk2 1.5L ST 12V Ecoboost 149kW/197HP MG1CS016

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 4 programinės įrangos versijos

Transporto priemonės duomenys

MarkėFORD
ModelisPUMA Mk2
Variklis1.5L ST 12V Ecoboost 149kW/197HP MG1CS016
Serijinė galia203 CV / 149 kW
Darbinis tūris1500 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisMG1CS016
Atmintis / EPROMMicro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 384Kbyte

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Max threshold air mass flow throught compressor
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Part pedal combustion load limit
  • Compressor pressure ratio limit for pumping and speed
  • Engine indicated torque at stoichiometric
  • Lambda enrichment - open loop
  • Max desired pressure ratio limit
  • Lambda driver wish
  • Lambda driver wish 2
  • Knock detection factor
  • Load limit at high effectiveness of LSPI mitigation
  • Load limit at low effectiveness of LSPI mitigation
  • Load limit at nominal effectiveness of LSPI mitigation
  • Maximum advance allowed
  • Intake manifold pressure
  • Maximum indicated torque
  • Maximum indicated torque for monitoring
  • Maximum indicated torque (overboost active)
  • Minimum indicated torque for monitoring
  • Max load
  • Max load at WOT
  • Maximum intake manifold pressure
  • Maximum throttle angle opening for a given RPM
  • Overall LSPI load limit
  • Percent accelerator pedal angle to desired throttle angle
  • Pressure ratio limit for overboost detection
  • Driver torque request for the transmission - 1st gear
  • Driver torque request for the transmission - 2th gear
  • Driver torque request for the transmission - 3th gear
  • Driver torque request for the transmission - 4th gear
  • Driver torque request for the transmission - 5th gear
  • Driver torque request for the transmission - 6th gear
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Max torque limitation in Neutral (N)
  • Torque limiter for for reverse gear
  • Max torque limitation with trailer - MT
  • Wastegate duty-cycle
  • Max tip at wastegate

Programinės įrangos identifikatoriai (4)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
JX6A-12B684-KAK1BY-12A650-BA 1.94.004N1B1-14C204-EB BOSCH MG1CS016
JX6A-12B684-KAK1BY-12A650-BA 1.94.014M1B1-14C204-DG BOSCH MG1CS016
JX6A-12B684-KAK1BY-12A650-BA 1.94.009M1B1-14C204-DH BOSCH MG1CS016
JX6A-12B684-KAK1BY-12A650-BA 1.94.004P1B1-14C204-HA BOSCH MG1CS016

ECU pastabos

Micro Infineon Tricore TC275TP This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata