FORD PUMA Mk2 1.0L 12V Ecoboost Hybrid 93kW/125HP MG1CS016

ECU BOSCH MG1CS016 · 126 CV (93 kW) · 999 cc · Benzina mild hybrid - MHEV

ECU duomenų bazėFORD › FORD PUMA Mk2 1.0L 12V Ecoboost Hybrid 93kW/125HP MG1CS016

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 22 programinės įrangos versijos

Transporto priemonės duomenys

MarkėFORD
ModelisPUMA Mk2
Variklis1.0L 12V Ecoboost Hybrid 93kW/125HP MG1CS016
Serijinė galia126 CV / 93 kW
Darbinis tūris999 cc
KurasBenzina mild hybrid - MHEV
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisMG1CS016
Atmintis / EPROMMicro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 384Kbyte

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Max threshold air mass flow throught compressor
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Part pedal combustion load limit
  • Compressor pressure ratio limit for pumping and speed
  • Engine indicated torque at stoichiometric
  • Lambda enrichment - open loop
  • Max desired pressure ratio limit
  • Lambda driver wish
  • Lambda driver wish 2
  • Knock detection factor
  • Load limit at high effectiveness of LSPI mitigation
  • Load limit at low effectiveness of LSPI mitigation
  • Load limit at nominal effectiveness of LSPI mitigation
  • Maximum advance allowed
  • Intake manifold pressure
  • Maximum indicated torque
  • Maximum indicated torque for monitoring
  • Maximum indicated torque (overboost active)
  • Minimum indicated torque for monitoring
  • Max load
  • Max load at WOT
  • Maximum intake manifold pressure
  • Maximum throttle angle opening for a given RPM
  • Overall LSPI load limit
  • Percent accelerator pedal angle to desired throttle angle
  • Pressure ratio limit for overboost detection
  • Requested crankshaft/transmission torque
  • Driver torque request for the transmission - 1st gear
  • Driver torque request for the transmission - 2th gear
  • Driver torque request for the transmission - 3th gear
  • Driver torque request for the transmission - 4th gear
  • Driver torque request for the transmission - 5th gear
  • Driver torque request for the transmission - 6th gear
  • Wastegate duty-cycle
  • Max tip at wastegate

Programinės įrangos identifikatoriai (22)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
LA6A-12B684-ABL1T1-12A650-TA 1.94.005L1T1-14C204-AAE BOSCH MG1CS016
LA6A-12B684-ABL1T1-12A650-UA 1.94.008L1T1-14C204-YG BOSCH MG1CS016
LA6A-12B684-ABL1T1-12A650-TA 1.94.021L1T1-14C204-AAF BOSCH MG1CS016
LA6A-12B684-ABL1T1-12A650-UA 1.94.011L1T1-14C204-XF BOSCH MG1CS016
LA6A-12B684-ABL1T1-12A650-KC 1.94.014L1T1-14C204-PC BOSCH MG1CS016
LA6A-12B684-ABL1T1-12A650-KC 1.94.007L1T1-14C204-PG BOSCH MG1CS016
LA6A-12B684-ABL1T1-12A650-KC 1.94.006L1T1-14C204-PF BOSCH MG1CS016
LA6A-12B684-ABL1T1-12A650-KC 1.94.010L1T1-14C204-PH BOSCH MG1CS016
LA6A-12B684-ABL1T1-12A650-UA 1.94.012L1T1-14C204-XG BOSCH MG1CS016
LA6A-12B684-ABL1T1-12A650-UA 1.94.008L1T1-14C204-XH BOSCH MG1CS016
LX6A-12B684-VAL1T1-12A650-LA 1.94.004L1T1-14C204-NF BOSCH MG1CS016
LX6A-12B684-VAL1T1-12A650-LA 1.94.012L1T1-14C204-NE BOSCH MG1CS016
MX7A-12B684-MAM1T1-12A650-XA 1.94.009P1T1-14C204-CC BOSCH MG1CS016
MX7A-12B684-MAM1T1-12A650-XA 1.94.022M1T1-14C204-TF BOSCH MG1CS016
MX7A-12B684-MAM1T1-12A650-HB 1.94.013M1T1-14C204-PE BOSCH MG1CS016
MX7A-12B684-MAM1T1-12A650-XA 1.94.022N1T1-14C204-GB BOSCH MG1CS016
MX7A-12B684-MAM1T1-12A650-XA 1.94.003N1T1-14C204-GC BOSCH MG1CS016
MX7A-12B684-MAM1T1-12A650-XA 1.94.012M1T1-14C204-MD BOSCH MG1CS016
MX7A-12B684-MAM1T1-12A650-HB 1.94.017N1T1-14C204-BC BOSCH MG1CS016
MX7A-12B684-MAM1T1-12A650-XA 1.94.017N1T1-14C204-KB BOSCH MG1CS016
MX7A-12B684-MAM1T1-12A650-XA 1.94.009N1T1-14C204-HB BOSCH MG1CS016
MX7A-12B684-MAM1T1-12A650-HB 1.94.012M1T1-14C204-JE BOSCH MG1CS016

ECU pastabos

Micro Infineon Tricore TC275TP This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop