DUCATI MULTISTRADA 1260 DVT 18->20 116kW

ECU BOSCH ME17.9.21 · 158 CV (116 kW) · 1260 cc · Benzina aspirato

ECU duomenų bazėDUCATI › DUCATI MULTISTRADA 1260 DVT 18->20 116kW

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 13 programinės įrangos versijos

Transporto priemonės duomenys

MarkėDUCATI
ModelisMULTISTRADA 1260 DVT
Variklis18->20 116kW
Serijinė galia158 CV / 116 kW
Darbinis tūris1260 cc
KurasBenzina aspirato
Transporto priemonės tipasMoto

ECU

GamintojasBOSCH
ModelisME17.9.21
Atmintis / EPROMMICRO ST TRICORE - 12288 Kbit - 180000

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Minimum advance allowed
  • Minimum advance allowed protection
  • Optimal spark timing/MBT
  • Advance at part load
  • Knock correction advance max
  • Desired engine load calculation
  • Desired engine load calculation 2
  • Lambda correction f(IAT)
  • Desired throttle angle
  • Exhaust gas temperature
  • Exhaust gas temperature threshold for component protection
  • Engine torque limit for transmission protection
  • Factor to correct fuel delivery system
  • Engine idle vs. ECT sensor
  • Engine idle vs. ECT sensor 2
  • Rpm threshold fuel cut
  • Lambda enrichment for components protection
  • Lambda minimum value for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM limiter - N
  • RPM limiter - R
  • Speed limiter
  • Throttle air mass flow calculation
  • Maximum throttle angle opening for a given RPM
  • Nominal throttle opening
  • Optimal engine moment
  • Power limit torque table
  • Requested torque map set 1
  • Requested torque map set 1 - monitoring
  • Requested torque map set 1 - monitoring 2
  • Requested torque map set 2
  • Requested torque map set 2 - monitoring
  • Requested torque map set 2 - monitoring 2
  • Requested torque map set 3
  • Requested torque map set 3 - monitoring
  • Requested torque map set 3 - monitoring 2
  • Driver torque request - MT
  • Requested torque map set 4 - monitoring
  • Requested torque map set 4 - monitoring 2
  • Variable valve timing - inlet
  • Variable valve timing - outlet

Programinės įrangos identifikatoriai (13)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1.91.00710SW046345 BOSCH ME17.9.21
1.91.01710SW035422 BOSCH ME17.9.21
1.91.00710SW046343 BOSCH ME17.9.21
1.91.00710SW046348 BOSCH ME17.9.21
1.91.00710SW043167 BOSCH ME17.9.21
1.91.01610SW046861 BOSCH ME17.9.21
1.91.01210SW046858 BOSCH ME17.9.21
1.91.00910SW067180 BOSCH ME17.9.21
1.91.01010SW035408 BOSCH ME17.9.21
1.91.00710SW046867 BOSCH ME17.9.21
1.91.00710SW046857 BOSCH ME17.9.21
1.91.00710SW048286 BOSCH ME17.9.21
1.91.01010SW046809 BOSCH ME17.9.21

ECU pastabos

Microprocessor TC1724 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius. DP2 - Ducati Performance with full exhaust
Microprocessor TC1724 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius.