CITROEN JUMPY 2.0L 16V D-4D 130kW/174HP DCM7.1A

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

Transporto priemonės duomenys

ECU

Galimos derinimo operacijos / parinktys:

• Boost pressure limiter
• Boost pressure limiter 2
• Maximum engine boost pressure F (atmospheric pressure)
• Boost pressure limit control
• Boost pressure
• Boost pressure F (temperature)
• Load / throttle position reference
• Load / throttle position reference 2
• Load / throttle position reference 3
• Max exhaust gas temperature curve for full load
• Exhaust gas temperature threshold for component protection
• Basic torque management at engine cranking
• Injection period
• Injection period 10
• Injection period 2
• Injection period 3
• Injection period 4
• Injection period 5
• Injection period 6
• Injection period 7
• Injection period 8
• Injection period 9
• Injection opening time related to inj. pressure
• Injection 1
• J
• Injection 3
• Injection 4
• Injection 5
• Injection 6
• Injection 7
• Torque limiter
• Torque limiter for diagnostic
• Torque limiter for smoke limitation
• Torque limiter for smoke limitation 2
• Maximum indicated torque
• Maximum indicated virtual torque
• Maximum indicated virtual torque 2
• Maximum engine power
• Throttle air mass flow calculation
• Throttle air mass flow calculation 2
• Max torque profile
• Max torque profile - AT
• Max torque profile for diagnostic
• Max torque profile - MT
• Max torque profile for IAT sensor
• Specific injection pressure limiter
• Specific injection pressure limiter 2
• Specific injection pressure limiter 3
• Specific injection pressure limiter for diagnostics
• Specific injection pressure limiter for EFT sensor
• Specific injection pressure
• Specific injection pressure 2
• Specific injection pressure 3
• Specific injection pressure 4
• Specific injection pressure 6
• Specific injection pressure 7
• Specific pressure injection after starting
• Specific pressure injection after starting 2
• Driver torque request
• Driver torque request for high speed
• Driver torque request for low speed
• Driver torque request from MAP sensor
• Driver torque request from MAP sensor - interpolation
• Driver torque request at the start
• Driver torque request for reverse gear
• Torque limiter for gear-shift too long
• Torque limiter for selected gear
• Torque limiter for the APS/BPS
• Torque limiter for EFT sensor
• Torque limit table for EOT sensor
• Torque limit table for the rail pressure demand
• Torque limit table for ECT sensor
• Take-off torque law from MAP sensor

Programinės įrangos identifikatoriai (2)

ECU pastabos

Gaukite failą šiai transporto priemonei

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy The Genius OBD + Bench € 2.500 Buy

Kiti CITROEN

→ Visos ECU CITROEN