CITROEN C3 Mk3 1.2L 12V THP PureTech 82kW/110HP VD46.1

ECU CONTINENTAL-SIEMENS-VDO VD46.1/VD46.3 · 111 CV (82 kW) · 1200 cc · Benzina sovralimentato

ECU duomenų bazėCITROEN › CITROEN C3 Mk3 1.2L 12V THP PureTech 82kW/110HP VD46.1

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 9 programinės įrangos versijos

Transporto priemonės duomenys

MarkėCITROEN
ModelisC3 Mk3
Variklis1.2L 12V THP PureTech 82kW/110HP VD46.1
Serijinė galia111 CV / 82 kW
Darbinis tūris1200 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasCONTINENTAL-SIEMENS-VDO
ModelisVD46.1/VD46.3
Atmintis / EPROMMicro Renesas - 30720Kbit - 3C0000

Galimos derinimo operacijos / parinktys:

  • Engine ignition timing versus temperature
  • Lambda/AFR full load/WOT
  • Optimal spark timing/MBT
  • Optimal spark timing/MBT 2
  • Advance correction
  • Advance correction 2
  • Advance correction 3
  • Knock correction advance max
  • Boost limiter correction for APS/BPS sensor
  • Boost pressure
  • Lambda correction for engine temperature after starting
  • Load / throttle position reference
  • Engine filling management
  • Engine indicated torque
  • Filling factor limit
  • Engine idle vs. ECT sensor
  • Engine idle
  • Engine idle vs. EOT sensor
  • High pressure fuel pump setpoint
  • Volumetric efficiency high pressure fuel pump
  • High fuel pressure pump limit for ECT sensor
  • Maximum injection quantity
  • Injection 1
  • L
  • Torque limiter 3
  • Advance limiter
  • Advance limiter for component protection 1
  • Torque limiter
  • Lambda enrichment for components protection
  • Speed limiter
  • Maximum indicated torque
  • Maximum indicated virtual torque
  • Maximum engine power
  • Maximum throttle angle opening for a given RPM
  • Maximum torque value for selected gear
  • Optimal engine moment
  • Driver torque request
  • Driver torque request for high speed
  • Driver torque request for low speed
  • Driver torque request at the start
  • Driver torque request for reverse gear
  • Torque limiter for selected gear
  • Torque limiter for selected gear - AT
  • Torque limiter in recovery mode
  • Turbocharger volumetric efficiency

Programinės įrangos identifikatoriai (9)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
9806671980 1.73.0079692267580 CONTINENTAL-SIEMENS-VDO VD46.1/VD46.3
9806671980 1.73.0039699402580 CONTINENTAL-SIEMENS-VDO VD46.1/VD46.3
9806671980 1.73.0069692502180 CONTINENTAL-SIEMENS-VDO VD46.1/VD46.3
9806671980 1.73.0049692518480 CONTINENTAL-SIEMENS-VDO VD46.1/VD46.3
9806671980 1.73.0149692596680 CONTINENTAL-SIEMENS-VDO VD46.1/VD46.3
9806671980 1.73.0089694721980 CONTINENTAL-SIEMENS-VDO VD46.1/VD46.3
9806671980 1.73.0089692856580 CONTINENTAL-SIEMENS-VDO VD46.1/VD46.3
9806671980 1.73.0039696330880 CONTINENTAL-SIEMENS-VDO VD46.1/VD46.3
9806671980 1.73.0049696297880 CONTINENTAL-SIEMENS-VDO VD46.1/VD46.3

ECU pastabos

This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):