Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 12 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | CITROEN |
| Modelis | C-CROSSER |
| Variklis | 2.2L 16V HDI 115kW/154HP EDC16CP39 |
| Serijinė galia | 156 CV / 115 kW |
| Darbinis tūris | 2200 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC16CP39 |
| Atmintis / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Galimos derinimo operacijos / parinktys:
- Boost pressure in aftertreatment modes
- EGR valve control
- Exhaust gas temperature
- Exhaust gas temperature 2
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection opening time related to inj. pressure
- Max injection limit
- Max injection limit - limp mode
- Initialization values over pressure control valve
- J
- Injection 2
- Injection 3
- Torque limiter 2
- Boost pressure deviation limits for basic charge air pressure
- Boost pressure deviation limits for basic charge air pressure 2
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature for O2
- LSU temperature setpoint
- LSU temperature threshold PID heater governor activation
- Injection quantity for engine overheating protection
- Protection for fuel overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter for diagnostics
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific pressure injection after starting
- Requested crankshaft/transmission torque
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear
- Torque limiter for for reverse gear
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Volumetric efficiency
- Volumetric efficiency - correction
- Turbocharger volumetric efficiency
- Turbocharger volumetric efficiency 2
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
Programinės įrangos identifikatoriai (12)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | 1037391743 |
1.67.017 | 1037391743 |
BOSCH EDC16CP39 |
| — | 1037386062 |
1.67.010 | 1037386099 |
BOSCH EDC16CP39 |
| — | 1037391728 |
1.67.010 | 1037391726 |
BOSCH EDC16CP39 |
| — | 1037391747 |
1.67.018 | 1037391747 |
BOSCH EDC16CP39 |
| — | 1037391721 |
1.67.010 | 1037391721 |
BOSCH EDC16CP39 |
| — | 1037391726 |
1.67.012 | 1037391726 |
BOSCH EDC16CP39 |
| — | 1037391742 |
1.67.012 | 1037391742 |
BOSCH EDC16CP39 |
| — | 1037386086 |
1.67.003 | 1037391747 |
BOSCH EDC16CP39 |
| — | 1037391725 |
1.67.014 | 1037391725 |
BOSCH EDC16CP39 |
| — | 1037386086 |
1.67.003 | 1037386086 |
BOSCH EDC16CP39 |
| — | 1037391728 |
1.67.003 | 1037391728 |
BOSCH EDC16CP39 |
| — | 1037386099 |
1.67.013 | 1037386099 |
BOSCH EDC16CP39 |
Techninės pastabos apie automobilį
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU pastabos
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Galimi papildomi moduliai
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
