CHEVROLET US/EU/SAM CRUZE Mk1 1.8L 16V 108kW/145HP DELCO E83

ECU DELCO E83 · 147 CV (108 kW) · 1800 cc · Benzina aspirato

ECU duomenų bazėCHEVROLET US/EU/SAM › CHEVROLET US/EU/SAM CRUZE Mk1 1.8L 16V 108kW/145HP DELCO E83

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 5 programinės įrangos versijos

Transporto priemonės duomenys

MarkėCHEVROLET US/EU/SAM
ModelisCRUZE Mk1
Variklis1.8L 16V 108kW/145HP DELCO E83
Serijinė galia147 CV / 108 kW
Darbinis tūris1800 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasDELCO
ModelisE83
Atmintis / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5554 16384 Kbit - 0x200000

Galimos derinimo operacijos / parinktys:

  • Engine ignition timing versus temperature
  • Advance at idle speed
  • Lambda/AFR full load/WOT
  • Optimal spark timing/MBT
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Desired engine load calculation
  • Variable exhaust camshaft timing 2
  • Variable exhaust camshaft timing
  • ECT for fan engagement
  • Engine idle
  • Engine idle in Park position
  • IVC
  • Variable intake camshaft timing
  • Torque limiter 2
  • Torque limiter
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Throttle angle management

Programinės įrangos identifikatoriai (5)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1263634712641071 1.91.00855581486 DELCO E83
1264292612654173 1.35.00455590676 DELCO E83
1264292612649229 1.35.00955599489 DELCO E83
1264292612645537 1.91.00755588869 DELCO E83
1264292612649229 1.91.00955599490 DELCO E83

Techninės pastabos apie automobilį

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU pastabos

Microprocessor ST10F275 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop