CHEVROLET US/EU/SAM COLORADO Mk3 3.6 DOHC V6 230kW/309HP DELCO E82

ECU DELCO E82 · 313 CV (23 kW) · 3600 cc · Benzina aspirato

ECU duomenų bazėCHEVROLET US/EU/SAM › CHEVROLET US/EU/SAM COLORADO Mk3 3.6 DOHC V6 230kW/309HP DELCO E82

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 1 programinės įrangos versijos

Transporto priemonės duomenys

MarkėCHEVROLET US/EU/SAM
ModelisCOLORADO Mk3
Variklis3.6 DOHC V6 230kW/309HP DELCO E82
Serijinė galia313 CV / 23 kW
Darbinis tūris3600 cc
KurasBenzina aspirato
Transporto priemonės tipasLCV

ECU

GamintojasDELCO
ModelisE82
Atmintis / EPROMMicro BGA ST MPC5676 - 600000

Galimos derinimo operacijos / parinktys:

  • Engine ignition timing versus temperature
  • Advance at idle speed
  • Lambda/AFR full load/WOT
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Desired engine load calculation
  • Variable exhaust camshaft timing 2
  • Variable exhaust camshaft timing
  • ECT for fan engagement
  • Engine idle vs. ECT sensor
  • Engine idle
  • Engine idle in Park position
  • Variable intake camshaft timing 2
  • Variable intake camshaft timing
  • Torque limiter 2
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for for reverse gear
  • Throttle angle management

Programinės įrangos identifikatoriai (1)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1268496312697607 1.91.01092510517 DELCO E82

ECU pastabos

Microprocessor MPC5676R This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop