CASE CONSTRUCTION WHEEL LOADERS 1021G 8.7L 6L 239kW/320HP MD1CE101

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

Transporto priemonės duomenys

ECU

Galimos derinimo operacijos / parinktys:

• Boost pressure limiter
• Boost pressure
• Displacement
• Maximum torque limitation at clutch
• Maximum torque limitation at clutch 2
• Desired fuel quantity map for open loop
• Exhaust gas temperature
• Exhaust gas temperature 2
• Engine reference power at crankshaft
• Max CAT temperature threshold for component protection
• Basic torque management at engine cranking
• Injection period
• Injection period 2
• Injection opening time related to inj. pressure
• Injection mass at high temperature
• Injection mass at low temperature
• Maximum fuel quantity for turbine overspeed prevention
• Injection limit - turbocharger protection
• Max injection limit
• Fuel quantity limitation after cold start
• L
• Torque limiter
• Torque limiter for diagnostic
• PTO torque limiter
• Torque limiter during particulate filter overloading - pressure
• Lambda value of the smoke limitation
• MAP - limp home mode
• Maximum absolute effective torque
• Maximum indicated torque
• Maximum engine torque at crank shaft
• Maximum engine power
• Max torque profile
• Injection quantity for engine overheating protection
• Injection quantity for engine overheating protection 2
• Pressure control map over pressure regulating valve
• Specific injection pressure limiter
• Specific injection pressure limiter 2
• Specific injection pressure limiter 3
• Specific injection pressure limiter for diagnostics
• Specific injection pressure limiter for EFT sensor
• Specific injection pressure
• Specific injection pressure 2
• Driver torque request at the start
• CAT downstream temperature sensor characterization
• CAT upstream temperature sensor characterization
• DPF downstream temperature sensor characterization
• DPF upstream temperature sensor characterization
• SCR downstream temperature sensor characterization
• SCR upstream temperature sensor characterization
• Turbo upstream temperature sensor characterization
• Torque limiter for for reverse gear
• Torque limiter for EFT sensor
• Torque limiter in recovery mode
• Torque limiter in recovery mode 2
• Torque limiter in recovery mode 3
• Torque limiter in recovery mode 4
• Torque model - torque to fuel quantity conversion
• Torque model for performance limiter
• Torque model with performance limiter stage 1 is active
• Torque model with performance limiter stage 2 active
• Torque model with performance limiter after coldstart 1 active
• Torque model with performance limiter after coldstart 2 active
• Turbocharger volumetric efficiency

Programinės įrangos identifikatoriai (3)

ECU pastabos

Gaukite failą šiai transporto priemonei

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy The Genius OBD + Bench € 2.500 Buy

Kiti CASE CONSTRUCTION

→ Visos ECU CASE CONSTRUCTION