BUICK ENVISION 2.0L TURBO 186kW/249HP DELCO E80

ECU DELCO E80 · 253 CV (186 kW) · 2000 cc · Benzina sovralimentato

ECU duomenų bazėBUICK › BUICK ENVISION 2.0L TURBO 186kW/249HP DELCO E80

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 1 programinės įrangos versijos

Transporto priemonės duomenys

MarkėBUICK
ModelisENVISION
Variklis2.0L TURBO 186kW/249HP DELCO E80
Serijinė galia253 CV / 186 kW
Darbinis tūris2000 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasDELCO
ModelisE80
Atmintis / EPROMMicro BGA ST MPC5676 - 600000

Galimos derinimo operacijos / parinktys:

  • Engine ignition timing versus temperature
  • Advance at idle speed
  • Lambda/AFR full load/WOT
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Boost pressure
  • Desired engine load calculation
  • Variable exhaust camshaft timing 2
  • Variable exhaust camshaft timing
  • ECT for fan engagement
  • Engine idle vs. ECT sensor
  • Engine idle
  • Engine idle in Park position
  • Variable intake camshaft timing 2
  • Variable intake camshaft timing
  • Torque limiter 2
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for for reverse gear
  • Throttle angle management
  • WG duty cycle vs RPM and boost

Programinės įrangos identifikatoriai (1)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1265368112668077 1.91.01012668082 DELCO E80

ECU pastabos

Microprocessor MPC5676R This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata