Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 7 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | BMW |
| Modelis | X1 SERIES E84 |
| Variklis | X1 23d 2.0L L4 16V 150kW/201HP EDC17CP02 |
| Serijinė galia | 204 CV / 15 kW |
| Darbinis tūris | 2000 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC17CP02 |
| Atmintis / EPROM | TRICORE con DFLASH & PFLASH - 180000 |
Galimos derinimo operacijos / parinktys:
- Maximum engine boost pressure F (atmospheric pressure)
- Maximum engine boost pressure F (atmospheric pressure) 2
- Boost pressure
- Boost pressure 2
- Boost pressure 3
- Boost pressure 4
- Maximum torque limitation at clutch
- EGR valve control
- EGR valve control 2
- Max accepted exhaust gas temperature value at particulate sensor
- Protection for engine overheating
- Protection for engine overheating 2
- Protection for engine overheating 3
- Injection period at full throttle
- Injection period at full throttle 2
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Maximum injection period
- Maximum injection period 2
- Injection opening time related to inj. pressure
- J
- L
- Torque limiter 3
- Torque limiter 4
- Torque limiter 5
- Torque limiter 6
- Torque limiter
- Torque limiter for diagnostic
- Torque limiter for diagnostic 2
- Torque limiter during particulate filter overloading - pressure
- Torque limiter during particulate filter overloading - temperature
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature limit - heater control
- LSU temperature threshold PID heater governor activation
- Speed limiter
- Max torque profile
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter 3
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Driver torque request
- Torque limiter for selected gear
- Torque limiter for EFT sensor
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
- Variable geometry duty cycle limit 4
Programinės įrangos identifikatoriai (7)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | 08512500 |
1.00.008 | 08516504 |
BOSCH EDC17CP02 |
| — | 08506442 |
1.00.025 | 08510102 |
BOSCH EDC17CP02 |
| — | 08512500 |
1.00.016 | 08516955 |
BOSCH EDC17CP02 |
| — | 08510593 |
1.00.032 | 08511508 |
BOSCH EDC17CP02 |
| — | 08512500 |
1.00.028 | 08516953 |
BOSCH EDC17CP02 |
| — | 08512500 |
1.00.019 | 08513036 |
BOSCH EDC17CP02 |
| — | 08506442 |
1.00.018 | 08509880 |
BOSCH EDC17CP02 |
Techninės pastabos apie automobilį
OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.
ECU pastabos
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. WARNING: it is possible to use the serial protocol only if the New Genius is equipped with the F32GN067 dongle. This software is equipped with a serial ANTITUNING system. For writing with the New Genius it is necessary to use the original certified file of the setting file. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
