BMW MOTORRAD F 800 GS 15->18 66kW

ECU BOSCH ME17.2.4 BMS-M · 90 CV (66 kW) · 800 cc · Benzina aspirato

ECU duomenų bazėBMW MOTORRAD › BMW MOTORRAD F 800 GS 15->18 66kW

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 15 programinės įrangos versijos

Transporto priemonės duomenys

MarkėBMW MOTORRAD
ModelisF 800 GS
Variklis15->18 66kW
Serijinė galia90 CV / 66 kW
Darbinis tūris800 cc
KurasBenzina aspirato
Transporto priemonės tipasMoto

ECU

GamintojasBOSCH
ModelisME17.2.4 BMS-M
Atmintis / EPROMMICRO ST TRICORE - 32768 - 400000

Galimos derinimo operacijos / parinktys:

  • Engine ignition timing versus temperature
  • Advance at idle speed
  • Lambda/AFR full load/WOT
  • Advance at idle speed - warm up
  • Optimal spark timing/MBT
  • Advance at part load
  • Advance at part load - warm up
  • Automatic stability control 1
  • Automatic stability control 2
  • Automatic stability control 3
  • Automatic stability control 4
  • Automatic stability control 5
  • Advance full load
  • Advance full load - warm up
  • Dynamic traction control
  • Dynamic traction control 2
  • Dynamic traction control 3
  • Dynamic traction control 4
  • Dynamic traction control 5
  • Exhaust valve management
  • Exhaust valve management - limiter
  • Factor to correct fuel delivery system
  • Engine torque reducing factor depending on engine speed
  • Engine idle vs. ECT sensor
  • Engine idle vs. ECT sensor 3
  • Injection correction cilinder 1
  • Injection correction cilinder 2
  • Rpm threshold fuel cut
  • Idle throttle angle correction for ECT sensor
  • Advance limiter for component protection 1
  • Advance limiter lower motor temperature threshold
  • Advance limiter upper motor temperature threshold
  • Torque limiter
  • Lambda efficiency
  • Exhaust valve opening limit
  • RPM Limiter
  • RPM Limiter 2
  • RPM Limiter for gear downshift
  • RPM limiter in limp mode
  • RPM limiter - N
  • Lambda driver wish
  • Lambda driver wish 2
  • Maximum indicated torque
  • Optimal engine moment
  • Specific injection pressure
  • Air mass flow
  • Exhaust gas temperature sensor
  • Throttle angle limitation
  • Throttle angle limitation 2
  • Throttle angle management
  • Cooling fan activation
  • Front tire circumference
  • Rear tire circumference

Programinės įrangos identifikatoriai (15)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
08358249 1.95.00208358326 BOSCH ME17.2.4 BMS-M
08358249 1.95.00308358320 BOSCH ME17.2.4 BMS-M
08396376 1.95.00408404755 BOSCH ME17.2.4 BMS-M
08389408 1.95.00208392495 BOSCH ME17.2.4 BMS-M
09899379 1.95.00309898175 BOSCH ME17.2.4 BMS-M
08396376 1.95.00408404763 BOSCH ME17.2.4 BMS-M
08389408 1.95.00308394338 BOSCH ME17.2.4 BMS-M
08358249 1.95.00308388194 BOSCH ME17.2.4 BMS-M
08414407 1.95.00608414530 BOSCH ME17.2.4 BMS-M
08389408 1.95.00308393733 BOSCH ME17.2.4 BMS-M
08358249 1.95.00308389246 BOSCH ME17.2.4 BMS-M
08389408 1.95.00308392497 BOSCH ME17.2.4 BMS-M
08396376 1.95.00408404753 BOSCH ME17.2.4 BMS-M
08358249 1.95.00308389248 BOSCH ME17.2.4 BMS-M
02612096231037528714 1.95.00908548792 BOSCH ME9 BMSK / ME9+ BMSK

ECU pastabos

MICRO Infineon Tricore TC1793 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocesor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata