BENTLEY CONTINENTAL GTC 6.0L V12 BITURBO 423kW/567HP ME7.1.1

ECU BOSCH ME7.1.1 · 575 CV (423 kW) · 6000 cc · Benzina sovralimentato

ECU duomenų bazėBENTLEY › BENTLEY CONTINENTAL GTC 6.0L V12 BITURBO 423kW/567HP ME7.1.1

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 3 programinės įrangos versijos

Transporto priemonės duomenys

MarkėBENTLEY
ModelisCONTINENTAL GTC
Variklis6.0L V12 BITURBO 423kW/567HP ME7.1.1
Serijinė galia575 CV / 423 kW
Darbinis tūris6000 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.1.1
Atmintis / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Boost pressure limiter
  • Boost pressure limiter 3
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Constant pressure control
  • Max boost pressure control
  • Air mass flow

Programinės įrangos identifikatoriai (3)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612019761037390793 1.84.01107C906018DR 0959 BOSCH ME7.1.1
0261S053831037502769 1.84.00407C906018GM 5097 BOSCH ME7.1.1
0261S056301037502772 1.84.00807C906018GS 5098 BOSCH ME7.1.1

Techninės pastabos apie automobilį

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU pastabos

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
EPROM AM29F800BB - Microprocessor ST10F275 To work on this ECU you can use NewTrasdata

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop