AUDI TT (8N) 3.2L V6 24V 184KW/247HP ME7.1.1

ECU BOSCH ME7.1.1 · 250 CV (184 kW) · 3200 cc · Benzina aspirato

ECU duomenų bazėAUDI › AUDI TT (8N) 3.2L V6 24V 184KW/247HP ME7.1.1

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 11 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisTT (8N)
Variklis3.2L V6 24V 184KW/247HP ME7.1.1
Serijinė galia250 CV / 184 kW
Darbinis tūris3200 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.1.1
Atmintis / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Speed / RPM limiter
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Speed limiter
  • Air mass flow

Programinės įrangos identifikatoriai (11)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612011921037376096 1.21.010022997032E 6647 BOSCH ME7.1.1
02612082311037368661 1.21.020022906032DN 0006 BOSCH ME7.1.1
02612082321037374676 1.21.007022906032DP 7000 BOSCH ME7.1.1
02612082321037368662 1.21.008022906032DP 0006 BOSCH ME7.1.1
02612082341037369306 1.21.013022906032DR 5545 BOSCH ME7.1.1
02612085911037370152 1.21.006022906032FA 5903 BOSCH ME7.1.1
02612085911037376054 1.21.010022906032FA 6659 BOSCH ME7.1.1
02612086201037371937 1.21.015022906032FK 6439 BOSCH ME7.1.1
02612086311037369765 1.21.010022906032FR 5893 BOSCH ME7.1.1
02612086511037370121 1.21.007022906032GE 5871 BOSCH ME7.1.1
02612086511037374351 1.21.007022906032GE 7000 BOSCH ME7.1.1

Techninės pastabos apie automobilį

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU pastabos

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop