AUDI TT (8N) 3.2L V6 24V 184KW/247HP DQ250

ECU TEMIC DQ250CXX · 250 CV (184 kW) · 3200 cc · Benzina aspirato

ECU duomenų bazėAUDI › AUDI TT (8N) 3.2L V6 24V 184KW/247HP DQ250

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 3 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisTT (8N)
Variklis3.2L V6 24V 184KW/247HP DQ250
Serijinė galia250 CV / 184 kW
Darbinis tūris3200 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasTEMIC
ModelisDQ250CXX
Atmintis / EPROMMICRO BGA CON FLASH A BORDO 448K - 70000

Galimos derinimo operacijos / parinktys:

  • Gear downshift 2->1
  • Gear downshift 3->2
  • Gear downshift 4->3
  • Gear downhift 5->4
  • Gear downshift 6->5
  • Direct gear engagement time
  • Maximum time shift
  • Time shift
  • Time shift with torque reduction
  • Gear upshift 1->2
  • Gear upshift 1->2 - NORMAL mode (D)
  • Gear upshift 2->3
  • Gear upshift 2->3 - NORMAL mode (D)
  • D-US
  • Gear upshift 3->4 - NORMAL mode (D)
  • Gear upshift 4->5
  • Gear upshift 4->5 - NORMAL mode (D)
  • Gear upshift 5->6
  • Gear upshift 5->6 - NORMAL mode (D)
  • Engagement time for overlapping gear downshift
  • Maximum torque limitation at clutch
  • Gearbox torque limiter
  • Gearbox torque limiter while taking off
  • RPM limiter
  • RPM limiter in limp mode
  • RPM limiter - N
  • Gearbox torque limiter for ECT sensor
  • Solenoid current for oil pressure
  • Maximum solenoid current for maximum clutch torque
  • Maximum allowable oil pressure
  • Minimum oil pressure allowed at the clutch
  • Minimum oil pressure at filling
  • Maximum upshifting time for 2 gears
  • Maximum upshifting time for 3 gears
  • Maximum upshifting time for 4 gears
  • Maximum clutch oil pressure
  • Oil pressure during adaptations
  • Oil pressure correction based on TOT
  • Oil pressure based on torque
  • S-DS
  • Maximum time for gear downshift
  • RPM for the engine stall with ESP ON
  • RPM for the engine stall with ESP OFF
  • Shift time with torque reduction
  • Gear upshift 1->2 - SPORT mode (S)
  • S-US
  • Gear upshift 2->3 - SPORT mode (S)
  • Gear upshift 3->4
  • Gear upshift 3->4 - SPORT mode (S)
  • Gear upshift 4->5 - SPORT mode (S)
  • Gear upshift 5->6 - SPORT mode (S)
  • Gear upshift 1->2 limiter
  • Gear upshift 1->2 - MANUAL mode
  • Gear upshift 2->3 limiter
  • Gear upshift 2->3 - MANUAL mode
  • Gear upshift 3->4 limiter
  • Gear upshift 3->4 - MANUAL mode
  • Gear upshift 4->5 limiter
  • Gear upshift 4->5 - MANUAL mode
  • Gear upshift 5->6 limiter
  • Gear upshift 5->6 - MANUAL mode
  • Clutch torque variation during gear shifting

Programinės įrangos identifikatoriai (3)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02E300046FC05R1_FG3J_3____AudiTT 1.94.02202E300046F 0505 TEMIC DQ250CXX
02E927770ADv0696R9602ea__getriebe_DSG_fG6R 1.00.00502E300011BL 1396 TEMIC DQ250CXX
02E927770GC06R1_FG3J_BMG4___AudiTT 1.94.02402E300046F 0603 TEMIC DQ250CXX

ECU pastabos

Microprocessor MPC555 / 556 This Setting File can be used for serial system NewGenius.

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop