AUDI TT (8N) 1.8L 20V TURBO 176KW/236HP ME7.5

ECU BOSCH ME7.5 · 239 CV (176 kW) · 1800 cc · Benzina sovralimentato

ECU duomenų bazėAUDI › AUDI TT (8N) 1.8L 20V TURBO 176KW/236HP ME7.5

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 1 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisTT (8N)
Variklis1.8L 20V TURBO 176KW/236HP ME7.5
Serijinė galia239 CV / 176 kW
Darbinis tūris1800 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.5
Atmintis / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure limiter 3
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • P
  • Max boost pressure control
  • Load/throttle position reference - AT
  • Air mass flow (diagnostic)
  • Air mass flow

Programinės įrangos identifikatoriai (1)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612080861037375111 1.42.0138N0906018CA 0010 BOSCH ME7.5

Techninės pastabos apie automobilį

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU pastabos

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop