AUDI TT (8N) 1.8L 20V TURBO 110KW/148HP ME7.5

ECU BOSCH ME7.5 · 150 CV (11 kW) · 1800 cc · Benzina sovralimentato

ECU duomenų bazėAUDI › AUDI TT (8N) 1.8L 20V TURBO 110KW/148HP ME7.5

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 8 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisTT (8N)
Variklis1.8L 20V TURBO 110KW/148HP ME7.5
Serijinė galia150 CV / 11 kW
Darbinis tūris1800 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.5
Atmintis / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Optimal spark timing/MBT
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure limiter 3
  • Boost pressure limiter 4
  • Boost pressure limiter 5
  • Boost pressure
  • Desired engine load calculation
  • Injection at part load
  • Lambda enrichment for components protection
  • Lambda driver wish
  • Knock detection factor
  • Throttle air mass flow calculation
  • Optimal engine moment
  • P
  • Max boost pressure control
  • Driver torque request
  • Throttle angle management

Programinės įrangos identifikatoriai (8)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612012001037377678 1.42.0078N0906018CT 0010 BOSCH ME7.5
02612012011037377669 1.42.0108N0906018DA 0010 BOSCH ME7.5
02612073241037360281 1.21.0188N0906018AK 0001 BOSCH ME7.5
02612074201037369397 1.42.0248N0906018AP 0003 BOSCH ME7.5
02612074201037366423 1.42.0138N0906018AP 0002 BOSCH ME7.5
02612074201037360847 1.21.0208N0906018AP 0001 BOSCH ME7.5
02612080851037366846 1.42.0118N0906018CC 0002 BOSCH ME7.5
02612086331037369772 1.42.0178N0906018CN 0010 BOSCH ME7.5

Techninės pastabos apie automobilį

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU pastabos

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop