AUDI TT (8J) 3.2L V6 24V 184KW/247HP ME7.1.1

ECU BOSCH ME7.1.1 · 250 CV (184 kW) · 3200 cc · Benzina aspirato

ECU duomenų bazėAUDI › AUDI TT (8J) 3.2L V6 24V 184KW/247HP ME7.1.1

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 13 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisTT (8J)
Variklis3.2L V6 24V 184KW/247HP ME7.1.1
Serijinė galia250 CV / 184 kW
Darbinis tūris3200 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.1.1
Atmintis / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Air mass flow

Programinės įrangos identifikatoriai (13)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612012271037382300 1.84.012022906032HE 6784 BOSCH ME7.1.1
02612012281037382194 1.84.003022906032HD 6783 BOSCH ME7.1.1
02612014481037387939 1.84.008022906032HG 1166 BOSCH ME7.1.1
02612014481037386812 1.84.008022906032HG 0862 BOSCH ME7.1.1
02612014491037384438 1.84.006022906032HH 0671 BOSCH ME7.1.1
02612014501037384450 1.84.008022906032HJ 0672 BOSCH ME7.1.1
02612016061037382542 1.84.005022906032KL 0098 BOSCH ME7.1.1
02612016081037384442 1.84.013022906032KN 0100 BOSCH ME7.1.1
02612018661037389013 1.84.009022906032KT 1054 BOSCH ME7.1.1
02612018681037389014 1.84.011022906032LA 1056 BOSCH ME7.1.1
02612018691037389430 1.84.006022906032LC 1058 BOSCH ME7.1.1
02612087921037378134 1.42.015022906032GH 8035 BOSCH ME7.1.1
0261S043011037396236 1.84.006022906032LS 2572 BOSCH ME7.1.1

Techninės pastabos apie automobilį

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU pastabos

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop