Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 6 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | AUDI |
| Modelis | SQ7 |
| Variklis | 4.0L V8 TDI 320kW/429HP MD1CP014 |
| Serijinė galia | 435 CV / 32 kW |
| Darbinis tūris | 4000 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | MD1CP014 |
| Atmintis / EPROM | Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte |
Galimos derinimo operacijos / parinktys:
- Boost pressure limiter
- Boost pressure limiter 2
- Maximum engine boost pressure F (atmospheric pressure)
- Maximum engine boost pressure F (atmospheric pressure) 2
- Boost pressure
- Boost pressure 2
- Boost pressure 3
- Boost pressure 4
- Boost pressure 5
- Boost pressure 6
- Boost pressure 7
- Protection for cylinder head overheating
- Maximum torque limitation at clutch
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value before turbine 2
- Max accepted exhaust gas temperature value before turbine 3
- Protection for engine overheating
- Injection period
- Injection period 10
- IF1
- Injection period 13
- Injection opening time related to inj. pressure
- J
- Torque limiter
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Speed limiter
- Max torque profile - AT
- Maximum torque value for reverse gear
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for fuel overheating
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure
- Specific injection pressure 2
- Driver torque request
- Start of injection
- Start of injection 2
- Torque limiter for the APS/BPS
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
Programinės įrangos identifikatoriai (6)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | — |
1.02.010 | 4M0997409 1004 |
BOSCH MD1CP014 |
| — | — |
1.02.008 | 4M0907409 0005 |
BOSCH MD1CP014 |
| — | — |
1.02.008 | 4M0997409 1005 |
BOSCH MD1CP014 |
| — | — |
1.02.017 | 4M0907409 0004 |
BOSCH MD1CP014 |
| — | — |
1.02.009 | 4M0907409 0008 |
BOSCH MD1CP014 |
| — | — |
1.02.009 | 4M0907409F 0002 |
BOSCH MD1CP014 |
ECU pastabos
Micro Infineon Tricore TC298TP This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
