AUDI S8 (D4) 4.0L V8 32V TFSI 382kW/512HP MED17.1.1

ECU BOSCH MED17.1.1 · 519 CV (382 kW) · 4000 cc · Benzina sovralimentato

ECU duomenų bazėAUDI › AUDI S8 (D4) 4.0L V8 32V TFSI 382kW/512HP MED17.1.1

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 16 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisS8 (D4)
Variklis4.0L V8 32V TFSI 382kW/512HP MED17.1.1
Serijinė galia519 CV / 382 kW
Darbinis tūris4000 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisMED17.1.1
Atmintis / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

Galimos derinimo operacijos / parinktys:

  • Maximum air charge for overboost protection with turbocharger fault
  • Base timing
  • Height correction for boost pressure
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Compression ratio for turbocharger protection
  • Exhaust gas temperature
  • Factor for reducing maximum filling
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM Limiter 2
  • RPM limiter 3
  • Knock detection factor
  • Maximum indicated torque
  • Maximum compression ratio
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Maximum negative deviation for boost overcharge
  • Optimal engine moment
  • Boost pressure threshold cycles for the overboost recognition
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • Maximum pressure ratio limit depending on temperature
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Driver torque request 2
  • Torque limiter for selected gear
  • Throttle angle management
  • Turbocharger volumetric efficiency
  • Wastegate duty-cycle

Programinės įrangos identifikatoriai (16)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1.00.0104H0907557 0009 BOSCH MED17.1.1
1.00.0194H0907557 0008 BOSCH MED17.1.1
1.94.0084H0907557C 0003 BOSCH MED17.1.1
1.94.0024H0907557C 0007 BOSCH MED17.1.1
1.00.0174H0907557E 0004 BOSCH MED17.1.1
1.00.0234H0907557 0007 BOSCH MED17.1.1
1.00.0194H0907557D 0003 BOSCH MED17.1.1
1.00.0144H0907557B 0004 BOSCH MED17.1.1
1.00.0104H0907557D 0005 BOSCH MED17.1.1
1.00.0034H0907557D 0004 BOSCH MED17.1.1
1.94.0104H0907557C 0006 BOSCH MED17.1.1
1.94.0214H0907557 0010 BOSCH MED17.1.1
1.94.0074H0907557 0010 BOSCH MED17.1.1
1.00.0124H0907557C 0001 BOSCH MED17.1.1
1.00.0154H0907557E 0002 BOSCH MED17.1.1
1.00.0304H0907557C 0004 BOSCH MED17.1.1

Techninės pastabos apie automobilį

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU pastabos

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop