Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 6 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | AUDI |
| Modelis | RS3 (8VA) |
| Variklis | 2.5L L5 20V TFSI 270kW/362HP MED17.1.1 |
| Serijinė galia | 367 CV / 27 kW |
| Darbinis tūris | 2500 cc |
| Kuras | Benzina sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | MED17.1.1 |
| Atmintis / EPROM | MICRO ST TRICORE - 32768 Kbit - 400000 |
Galimos derinimo operacijos / parinktys:
- Base timing
- Advance at idle speed
- Optimal spark timing/MBT
- Boost pressure limit control
- Height correction for boost pressure
- Desired engine load calculation
- Lambda correction for engine temperature after starting
- Compression ratio limiting for compressor depending on IAT sensor
- Desired pressure ratio
- Exhaust gas temperature
- High pressure fuel pump setpoint
- High fuel pressure pump limit for ECT sensor
- Lambda enrichment for components protection
- Lambda correction for exhaust manifold temperature
- RPM Limiter
- RPM Limiter 2
- RPM limiter 3
- RPM limiter 4
- RPM Limiter 5
- RPM limit for EOT sensor
- Boost pressure linearization
- Lambda driver wish
- Knock detection factor
- Speed limiter
- Maximum boost pressure load
- Throttle air mass flow calculation
- Manifold absolute pressure time delay
- Characteristic manifold absolute pressure time constant of the LRS
- Max torque profile
- Max torque profile (overboost active)
- Optimal engine moment
- Relative permissible torque from the pedal position in torque limitation
- Relative permissible torque from the pedal position in torque limitation 2
- Pressure ratio depending on IAT
- Maximum pressure ratio limit depending on temperature
- Driver torque request
- Driver torque request 2
- Torque limiter for selected gear
- Throttle angle management
Programinės įrangos identifikatoriai (6)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | — |
1.00.008 | 8V0907404 0007 |
BOSCH MED17.1.1 |
| — | — |
1.00.033 | 8V0907404 0002 |
BOSCH MED17.1.1 |
| — | — |
1.00.032 | 8V0907404 0003 |
BOSCH MED17.1.1 |
| — | — |
1.00.019 | 8V0907404 0004 |
BOSCH MED17.1.1 |
| — | — |
1.00.020 | 8V0907404 0005 |
BOSCH MED17.1.1 |
| — | — |
1.00.014 | 8V0907404 0006 |
BOSCH MED17.1.1 |
Techninės pastabos apie automobilį
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU pastabos
MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
