AUDI ALLROAD A4/A6 2.7L BITURBO 184kW/247HP ME7.1

ECU BOSCH ME7.1/5 · 250 CV (184 kW) · 2700 cc · Benzina sovralimentato

ECU duomenų bazėAUDI › AUDI ALLROAD A4/A6 2.7L BITURBO 184kW/247HP ME7.1

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 10 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisALLROAD A4/A6
Variklis2.7L BITURBO 184kW/247HP ME7.1
Serijinė galia250 CV / 184 kW
Darbinis tūris2700 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.1/5
Atmintis / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Constant pressure control
  • Max boost pressure control
  • Load/throttle position reference - AT
  • Air mass flow

Programinės įrangos identifikatoriai (10)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612066401037354754 1.21.0054Z7907551B 0003 BOSCH ME7.1/5
02612066411037354775 1.21.0124Z7907551C 0005 BOSCH ME7.1/5
02612066411037354549 1.21.0074Z7907551C 0003 BOSCH ME7.1/5
02612071341037360277 1.21.0214Z7907551E 0001 BOSCH ME7.1/5
02612071341037354808 1.21.0044Z7907551E 0001 BOSCH ME7.1/5
02612071371037360858 1.21.0124Z7907551D 0002 BOSCH ME7.1/5
02612071381037360874 1.21.0104Z7907551H 0002 BOSCH ME7.1/5
02612071381037354847 1.21.0064Z7907551H 0001 BOSCH ME7.1/5
02612072601037360860 1.21.0054Z7907551K 0002 BOSCH ME7.1/5
02612072601037360166 1.21.0044Z7907551K 0001 BOSCH ME7.1/5

Techninės pastabos apie automobilį

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU pastabos

Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.