AUDI A8 (D4/4H) 4.0L V8 32V TFSI 309kW/414HP MED17.1.1

ECU BOSCH MED17.1.1 · 420 CV (309 kW) · 4000 cc · Benzina sovralimentato

ECU duomenų bazėAUDI › AUDI A8 (D4/4H) 4.0L V8 32V TFSI 309kW/414HP MED17.1.1

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 7 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisA8 (D4/4H)
Variklis4.0L V8 32V TFSI 309kW/414HP MED17.1.1
Serijinė galia420 CV / 309 kW
Darbinis tūris4000 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisMED17.1.1
Atmintis / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

Galimos derinimo operacijos / parinktys:

  • Maximum air charge for overboost protection with turbocharger fault
  • Base timing
  • Optimal spark timing/MBT
  • Boost pressure limiter
  • Boost pressure
  • Height correction for boost pressure
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Factor for reducing maximum filling
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM Limiter 2
  • Knock detection factor
  • Speed limiter
  • Speed limiter 2
  • Speed limiter 3
  • Maximum indicated torque
  • Maximum compression ratio
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Boost pressure threshold cycles for the overboost recognition
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • Relative permissible torque from the pedal position in torque limitation 2
  • Maximum pressure ratio limit depending on temperature
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Throttle angle management
  • Turbocharger volumetric efficiency
  • Wastegate duty-cycle

Programinės įrangos identifikatoriai (7)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1.00.0124H0906014J 0006 BOSCH MED17.1.1
1.00.0114H0906014N 0001 BOSCH MED17.1.1
1.94.0084H0906014G 0007 BOSCH MED17.1.1
1.00.0124H0906014L 0005 BOSCH MED17.1.1
1.94.0034H0906014N 0002 BOSCH MED17.1.1
1.94.0094H0906014G 0002 BOSCH MED17.1.1
1.00.0234H0906014L 0003 BOSCH MED17.1.1

Techninės pastabos apie automobilį

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU pastabos

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop