AUDI A8 (D3/4E) 3.0L V6 24V TDI 171KW/229HP EDC16+

ECU BOSCH EDC16U31/U34/CP34 · 232 CV (171 kW) · 3000 cc · Diesel sovralimentato

ECU duomenų bazėAUDI › AUDI A8 (D3/4E) 3.0L V6 24V TDI 171KW/229HP EDC16+

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 28 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisA8 (D3/4E)
Variklis3.0L V6 24V TDI 171KW/229HP EDC16+
Serijinė galia232 CV / 171 kW
Darbinis tūris3000 cc
KurasDiesel sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisEDC16U31/U34/CP34
Atmintis / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Galimos derinimo operacijos / parinktys:

  • Boost pressure limiter
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Boost pressure 2
  • Maximum torque limitation at clutch
  • Load / throttle position reference
  • EGR valve control
  • Exhaust gas temperature
  • Protection for engine overheating
  • Basic torque management at engine cranking
  • Engine idle vs. ECT sensor
  • Injection period
  • Injection period - correction
  • Injection opening time related to inj. pressure
  • J
  • Injection 2
  • Torque limiter 2
  • Lambda value of the smoke limitation
  • Minimum LSU sensor temperature for O2
  • Maximum LSU sensor temperature for O2
  • LSU temperature threshold PID heater governor activation
  • Protection for air load overheating
  • Protection for fuel overheating
  • Protection for oil overheating
  • Specific injection pressure limiter
  • Specific injection pressure
  • Q
  • Driver torque request
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for for reverse gear
  • Torque limiter for the APS/BPS
  • Torque limiter in recovery mode
  • Turbocharger volumetric efficiency
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit 2

Programinės įrangos identifikatoriai (28)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1037381397 1.67.0174E0910402J 0010 BOSCH EDC16U31/U34/CP34
1037377109 1.67.0194E0910401S 0030 BOSCH EDC16U31/U34/CP34
1037379484 1.67.0194E0910401Q 0040 BOSCH EDC16U31/U34/CP34
1037384622 1.67.0144E0910402J 0020 BOSCH EDC16U31/U34/CP34
10SW082797 1.67.0134E0997401K 0001 BOSCH EDC16U31/U34/CP34
1037375254 1.67.0334E0910401Q 0020 BOSCH EDC16U31/U34/CP34
1037381573 1.67.0214E0910402G 0020 BOSCH EDC16U31/U34/CP34
1037384619 1.67.0164E0910402F 0020 BOSCH EDC16U31/U34/CP34
1037379815 1.67.0154E0910402 0020 BOSCH EDC16U31/U34/CP34
1037384618 1.67.0234E0910402E 0020 BOSCH EDC16U31/U34/CP34
10SW086824 1.67.0154E0997401D 0001 BOSCH EDC16U31/U34/CP34
1037384620 1.67.0384E0910402G 0030 BOSCH EDC16U31/U34/CP34
1037370835 1.67.0264E0910401A 0020 BOSCH EDC16U31/U34/CP34
1037370771 1.67.0274E0910401H 0010 BOSCH EDC16U31/U34/CP34
1037371880 1.67.0194E0910401H 0040 BOSCH EDC16U31/U34/CP34
1037372202 1.67.0234E0910401B 0040 BOSCH EDC16U31/U34/CP34
1037374414 1.67.0284E0910401S 0010 BOSCH EDC16U31/U34/CP34
1037379813 1.67.0224E0910402B 0030 BOSCH EDC16U31/U34/CP34
1037372121 1.67.0394E0910401J 0020 BOSCH EDC16U31/U34/CP34
1037372485 1.67.0394E0910401J 0040 BOSCH EDC16U31/U34/CP34
1037381549 1.67.0134E0910402F 0010 BOSCH EDC16U31/U34/CP34
1037371075 1.67.0264E0910401H 0030 BOSCH EDC16U31/U34/CP34
1037375255 1.67.0194E0910401H 0050 BOSCH EDC16U31/U34/CP34
1037381550 1.67.0164E0910402E 0010 BOSCH EDC16U31/U34/CP34
1037372488 1.67.0284E0910401B 0060 BOSCH EDC16U31/U34/CP34
1037379814 1.67.0194E0910402A 0020 BOSCH EDC16U31/U34/CP34
1037379482 1.67.0154E0910401S 0040 BOSCH EDC16U31/U34/CP34
1037377334 1.67.0274E0910401Q 0030 BOSCH EDC16U31/U34/CP34

Techninės pastabos apie automobilį

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU pastabos

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool.
Original EPROM Am29BDD160G PQFP 80 Pin - Microprocessor Motorola MPC56x. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):