Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 3 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | AUDI |
| Modelis | A7 (4G8) |
| Variklis | 3.0L V6 24V TDI 200kW/268HP EDC17CP54 |
| Serijinė galia | 272 CV / 2 kW |
| Darbinis tūris | 3000 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC17CP54 |
| Atmintis / EPROM | Micro TC1793 + Flash esterna M58BW032FB |
Galimos derinimo operacijos / parinktys:
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure 2
- Boost pressure 3
- Boost pressure 4
- Protection for cylinder head overheating
- Maximum torque limitation at clutch
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value at particulate sensor
- Protection for engine overheating
- Basic torque management at engine cranking
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period limit
- Injection period limit 2
- Injection period limit 3
- Injection opening time related to inj. pressure
- Injection 1
- J
- Injection 3
- Injection 4
- L
- Torque limiter 3
- Torque limiter 4
- Torque limiter
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Speed limiter
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for fuel overheating
- Protection for oil overheating
- Specific injection pressure limiter
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 3
- Driver torque request
- Driver torque request 2
- Torque limiter for selected gear
- Overboost timing
- Overboost timing 2
- Torque limiter for the APS/BPS
- Variable geometry duty cycle limit
Programinės įrangos identifikatoriai (3)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | — |
1.00.002 | 4G0997401F 0002 |
BOSCH EDC17CP54 |
| — | — |
1.00.023 | 4G2907401B 0007 |
BOSCH EDC17CP54 |
| — | — |
1.00.015 | 4G2907401B 0001 |
BOSCH EDC17CP54 |
Techninės pastabos apie automobilį
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU pastabos
Micro Infineon Tricore TC1793 + External Flash M58BW032FB This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
