Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 10 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | AUDI |
| Modelis | A6 (C6/4F) |
| Variklis | 3.0L V6 24V TDI 176KW/236HP EDC17CP14 |
| Serijinė galia | 239 CV / 176 kW |
| Darbinis tūris | 3000 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC17CP14 |
| Atmintis / EPROM | MICRO ST TRICORE 1796 + XROM SPANSION CD016 |
Galimos derinimo operacijos / parinktys:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control 4
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection opening time related to inj. pressure
- Initialization values over pressure control valve
- J
- Lambda reference
- Minimum LSU sensor temperature limit - heater control
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Speed limiter
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 4
- Specific injection pressure in aftertreatment modes
- Specific pressure injection after starting
- Driver torque request
- Driver torque request AWD
- Driver torque request for reverse gear
- CAT downstream temperature sensor characterization
- DPF downstream temperature sensor characterization
- DPF upstream temperature sensor characterization
- Turbo upstream temperature sensor characterization
- Torque limiter for selected gear
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque model - torque to fuel quantity conversion - particulate regeneration mode
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
- Variable geometry duty cycle limit 4
- Variable geometry duty cycle limit in regeneration mode
Programinės įrangos identifikatoriai (10)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | — |
1.00.041 | 4F9910402A 0080 |
BOSCH EDC17CP14 |
| — | — |
1.94.007 | 4F9910401E 0070 |
BOSCH EDC17CP14 |
| — | — |
1.00.013 | 4F9910402A 0070 |
BOSCH EDC17CP14 |
| — | — |
1.00.024 | 4F9910402D 0070 |
BOSCH EDC17CP14 |
| — | — |
1.00.009 | 4F9ABT402A A040 |
BOSCH EDC17CP14 |
| — | — |
1.00.031 | 4F9910402A 0040 |
BOSCH EDC17CP14 |
| — | — |
1.00.004 | 4F9910402D 0050 |
BOSCH EDC17CP14 |
| — | — |
1.00.025 | 4F9910402A 0060 |
BOSCH EDC17CP14 |
| — | — |
1.94.020 | 4F9910402A 0050 |
BOSCH EDC17CP14 |
| — | — |
1.00.027 | 4F9910401E 0060 |
BOSCH EDC17CP14 |
Techninės pastabos apie automobilį
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU pastabos
EPROM SPANSION S29CD016 PQFP 80 Pin + MicroTRICORE TC1796 It is possible to support this ECU via OBDII using NewGenius and protocol FLASH_0506 WITHOUT PERFORMING the unlock patch and starting always from a 32Mbit TOTAL size file. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
