AUDI A4 (B9/8W) 40 2.0L 16V TDI 150kW/201HP MD1CS004

ECU BOSCH MD1CS004 · 204 CV (15 kW) · 2000 cc · Diesel sovralimentato

ECU duomenų bazėAUDI › AUDI A4 (B9/8W) 40 2.0L 16V TDI 150kW/201HP MD1CS004

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 6 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisA4 (B9/8W)
Variklis40 2.0L 16V TDI 150kW/201HP MD1CS004
Serijinė galia204 CV / 15 kW
Darbinis tūris2000 cc
KurasDiesel sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisMD1CS004
Atmintis / EPROMMicro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte

Galimos derinimo operacijos / parinktys:

  • Boost pressure limiter
  • Boost limiter correction for APS/BPS sensor
  • Protection for cylinder head overheating
  • Maximum torque limitation at clutch
  • Max accepted exhaust gas temperature value before turbine
  • Max accepted exhaust gas temperature value before turbine 2
  • Max accepted exhaust gas temperature value before turbine 3
  • Protection for engine overheating
  • Basic torque management at engine cranking
  • Basic torque management at engine cranking 2
  • Injection period
  • Injection period 2
  • Injection period 3
  • Injection period 4
  • Injection period 5
  • Injection period 6
  • Injection period limit
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 2
  • J
  • Injection 3
  • Injection 4
  • L
  • Torque limiter 3
  • Torque limiter 4
  • Torque limiter
  • Smoke limiter
  • Lambda reference
  • Lambda value of the smoke limitation
  • Lambda value of the smoke limitation 2
  • Lambda value of the smoke limitation 4
  • Speed limiter
  • Protection for air load overheating
  • Protection for exhaust gas temperature before turbine
  • Protection for exhaust gas temperature before turbine 2
  • Protection for fuel overheating
  • Protection for fuel overheating 2
  • Protection for oil overheating
  • Pressure control map over pressure regulating valve
  • Specific injection pressure limiter
  • Maximum pressure ratio limit depending on temperature
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 3
  • Specific injection pressure 5
  • Specific injection pressure 6
  • Specific air mass charge
  • Specific air mass charge 2
  • Specific air mass charge 3
  • Specific air mass charge 4
  • Driver torque request
  • Driver torque request 2
  • Setpoint maximum turbocharger speed
  • Overboost timing
  • Overboost timing 2
  • Overboost timing 3
  • Overboost timing 4
  • Overboost timing 5
  • Torque limiter for the APS/BPS
  • Turbocharger volumetric efficiency

Programinės įrangos identifikatoriai (6)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1.02.01305L906027M 1049 BOSCH MD1CS004
1.02.00905L906027F 6314 BOSCH MD1CS004
1.02.02405L906027Q 1854 BOSCH MD1CS004
1.02.00205L906027L 0844 BOSCH MD1CS004
1.02.00305L906027Q 4025 BOSCH MD1CS004
1.02.02905L906027F 6903 BOSCH MD1CS004

ECU pastabos

Micro Infineon Tricore TC298TP This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata