Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 13 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | AUDI |
| Modelis | A4 (B8/8K) |
| Variklis | 2.0L 16V TDI 130kW/174HP EDC17C46 |
| Serijinė galia | 177 CV / 13 kW |
| Darbinis tūris | 2000 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC17C46 |
| Atmintis / EPROM | MICRO ST TRICORE - 16384 Kbit - 200000 |
Galimos derinimo operacijos / parinktys:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Maximum torque limitation at clutch
- Regeneration limit for DPF
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control 4
- EGR valve control 5
- EGR valve control 6
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value before turbine 2
- Protection for engine overheating
- Basic torque management at engine cranking
- Basic torque management at engine cranking 2
- Engine idle vs. ECT sensor
- Injection period
- Injection period 10
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection period 7
- Injection period 8
- Injection period 9
- Injection opening time related to inj. pressure
- Initialization values over pressure control valve
- J
- Torque limiter 2
- Smoke limiter
- Lambda reference
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Speed limiter
- Max allowed torque for speed ratio
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine 2
- Protection for exhaust gas temperature before turbine 3
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter for EFT sensor
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 2
- Specific pressure injection after starting
- Driver torque request
- Torque limiter for selected gear
- Torque limiter for selected gear 2
- Torque limiter for for reverse gear
- Setpoint maximum turbocharger speed
- Torque limiter for the APS/BPS
- Torque model - torque to fuel quantity conversion - particulate regeneration mode
- Torque model - torque to fuel quantity conversion - particulate regeneration mode 2
- Variable geometry duty cycle limit
Programinės įrangos identifikatoriai (13)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | — |
1.94.011 | 03L906018JJ 4724 |
BOSCH EDC17C46 |
| — | — |
1.94.016 | 03L906018JG 2839 |
BOSCH EDC17C46 |
| — | — |
1.94.004 | 03L906018KL 9977 |
BOSCH EDC17C46 |
| — | — |
1.94.016 | 03L906018KL 9978 |
BOSCH EDC17C46 |
| — | — |
1.94.004 | 03L906018LB 8364 |
BOSCH EDC17C46 |
| — | — |
1.94.015 | 03L906018JH 9978 |
BOSCH EDC17C46 |
| — | — |
1.00.009 | 03L906018JJ 1368 |
BOSCH EDC17C46 |
| — | — |
1.94.014 | 03L906018JJ 9978 |
BOSCH EDC17C46 |
| — | — |
1.00.009 | 03L906018JG 9978 |
BOSCH EDC17C46 |
| — | — |
1.94.002 | 03L906018JJ 9977 |
BOSCH EDC17C46 |
| — | — |
1.94.014 | 03L906018KD 9977 |
BOSCH EDC17C46 |
| — | — |
1.94.013 | 03L906018KL 3112 |
BOSCH EDC17C46 |
| — | — |
1.00.015 | 03L906018JH 9977 |
BOSCH EDC17C46 |
Techninės pastabos apie automobilį
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU pastabos
MICRO Infineon Tricore TC1767 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
