Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 12 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | AUDI |
| Modelis | A4 (B8/8K) |
| Variklis | 1.8L 16V TFSI 125kW/168HP SIMOS 12 |
| Serijinė galia | 170 CV / 125 kW |
| Darbinis tūris | 1800 cc |
| Kuras | Benzina sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | CONTINENTAL-SIEMENS-VDO |
| Modelis | SIMOS 12.x |
| Atmintis / EPROM | MICRO ST TRICORE - 32768 Kbit - 400000 |
Galimos derinimo operacijos / parinktys:
- Base timing
- Base timing 2
- Lambda/AFR full load/WOT
- Advance correction for IAT sensor
- Boost pressure limiter
- Desired engine load calculation - high port flap position
- Desired engine load calculation - low port flap position
- Lambda correction
- Maximum torque limitation at clutch
- Gearbox maximum torque allowed
- High pressure fuel pump setpoint
- Intake pressure protection
- Torque limiter
- RPM Limiter
- Lambda reference
- Knock detection factor
- Max torque profile for gearbox protection - AT
- Max torque profile for gearbox protection - MT
- Max torque profile - AT
- Max torque profile - MT
- Optimal engine moment
- Engine moment management - high port flap position
- Engine moment management - low port flap position
- Maximum pressure ratio limit depending on temperature
- Pop/blow off valve offset - close model
- Pop/blow off valve offset - open model
- Driver torque request
- Driver torque request for high speed
- Driver torque request for high speed - MT
- Driver torque request for high speed in Sport mode
- Driver torque request for low speed
- Driver torque request for low speed - MT
- Driver torque request for low speed in Sport mode
- Driver torque request for reverse gear
Programinės įrangos identifikatoriai (12)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | — |
1.00.010 | 8K0906264B 0002 |
CONTINENTAL-SIEMENS-VDO SIMOS 12.x |
| — | — |
1.00.009 | 8K0906264 0010 |
CONTINENTAL-SIEMENS-VDO SIMOS 12.x |
| — | — |
1.33.028 | 8K0906264B 0001 |
CONTINENTAL-SIEMENS-VDO SIMOS 12.x |
| — | — |
1.00.014 | 8K0906264 0011 |
CONTINENTAL-SIEMENS-VDO SIMOS 12.x |
| — | — |
1.00.015 | 8K0906264B 0003 |
CONTINENTAL-SIEMENS-VDO SIMOS 12.x |
| — | — |
1.33.029 | 8K0906264 0004 |
CONTINENTAL-SIEMENS-VDO SIMOS 12.x |
| — | — |
1.33.011 | 8K0906264 0005 |
CONTINENTAL-SIEMENS-VDO SIMOS 12.x |
| — | — |
1.33.016 | 8K0906264 0006 |
CONTINENTAL-SIEMENS-VDO SIMOS 12.x |
| — | — |
1.33.020 | 8K0906264 0007 |
CONTINENTAL-SIEMENS-VDO SIMOS 12.x |
| — | — |
1.33.016 | 8K0906264 0008 |
CONTINENTAL-SIEMENS-VDO SIMOS 12.x |
| — | — |
1.00.011 | 8K0906264A 0003 |
CONTINENTAL-SIEMENS-VDO SIMOS 12.x |
| — | — |
1.33.023 | 8K0906264A 0004 |
CONTINENTAL-SIEMENS-VDO SIMOS 12.x |
Techninės pastabos apie automobilį
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU pastabos
MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
