AUDI A4 (B6/8E/8H) 2.0L 8V 110kW/148HP ME7.5

ECU BOSCH ME7.5 · 150 CV (11 kW) · 2000 cc · Benzina aspirato

ECU duomenų bazėAUDI › AUDI A4 (B6/8E/8H) 2.0L 8V 110kW/148HP ME7.5

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 15 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisA4 (B6/8E/8H)
Variklis2.0L 8V 110kW/148HP ME7.5
Serijinė galia150 CV / 11 kW
Darbinis tūris2000 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.5
Atmintis / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Air mass flow

Programinės įrangos identifikatoriai (15)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612060511037360623 1.21.0128E0907557 0005 BOSCH ME7.5
02612060511037360917 1.21.0128E0907557 0006 BOSCH ME7.5
02612072201037362556 1.21.0108E0909557C 0003 BOSCH ME7.5
02612072851037362543 1.21.0078E0909557 0003 BOSCH ME7.5
02612072861037360218 1.21.0098E0909557A 0001 BOSCH ME7.5
02612074011037360396 1.21.0148B0907557F 0006 BOSCH ME7.5
02612077531037363401 1.21.0108E0909557D 0002 BOSCH ME7.5
02612077561037363477 1.21.0158E0909557G 0003 BOSCH ME7.5
02612079751037366476 1.21.0118E0909557L 0002 BOSCH ME7.5
02612079771037366475 1.21.0178B0909557J 0002 BOSCH ME7.5
02612079771037363629 1.21.0078E0909557J 0001 BOSCH ME7.5
02612079781037363630 1.21.0138E0909557H 0001 BOSCH ME7.5
02612086901037372662 1.21.0138E0909557R 0010 BOSCH ME7.5
02612086911037372615 1.21.0178E0909557S 0020 BOSCH ME7.5
02612086921037372659 1.21.0128E1909557 0010 BOSCH ME7.5

Techninės pastabos apie automobilį

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU pastabos

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata