AUDI A4 (B6/8E/8H) 2.0L 16V FSI 110kW/148HP MED7.1.1

ECU BOSCH MED7.1.1 · 150 CV (11 kW) · 2000 cc · Benzina aspirato

ECU duomenų bazėAUDI › AUDI A4 (B6/8E/8H) 2.0L 16V FSI 110kW/148HP MED7.1.1

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 6 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisA4 (B6/8E/8H)
Variklis2.0L 16V FSI 110kW/148HP MED7.1.1
Serijinė galia150 CV / 11 kW
Darbinis tūris2000 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisMED7.1.1
Atmintis / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Air mass flow

Programinės įrangos identifikatoriai (6)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
0261S010061037367243 1.21.0078E0906018K 0008 BOSCH MED7.1.1
0261S010061037369725 1.21.0118E0906018K 0009 BOSCH MED7.1.1
0261S010061037366885 1.21.0038E0906018K 0007 BOSCH MED7.1.1
0261S010231037368341 1.21.0038E1910018 0020 BOSCH MED7.1.1
0261S010231037369001 1.21.0028E1910018 0030 BOSCH MED7.1.1
0261S010361037369747 1.21.0078E1910018D 0010 BOSCH MED7.1.1

Techninės pastabos apie automobilį

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU pastabos

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.