Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 23 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | AUDI |
| Modelis | A3 (8P) MY08 |
| Variklis | 2.0L 16V TDI 103kW/138HP EDC17CP14 |
| Serijinė galia | 140 CV / 103 kW |
| Darbinis tūris | 2000 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC17CP14 |
| Atmintis / EPROM | MICRO ST TRICORE - 16384 Kbit - 200000 |
Galimos derinimo operacijos / parinktys:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Maximum torque limitation at clutch
- Regeneration limit for DPF
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control 4
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Injection opening time related to inj. pressure
- Initialization values over pressure control valve
- Injection 1
- J
- Speed / RPM limiter
- Smoke limiter
- Lambda reference
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature limit - heater control
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Speed limiter
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for fuel overheating
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter for EFT sensor
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure in aftertreatment modes
- Specific pressure injection after starting
- Driver torque request
- Driver torque request AWD
- Driver torque request for reverse gear
- CAT downstream temperature sensor characterization
- DPF downstream temperature sensor characterization
- DPF upstream temperature sensor characterization
- Turbo upstream temperature sensor characterization
- Torque limiter for selected gear
- Torque limiter for for reverse gear
- Setpoint maximum turbocharger speed
- Torque limiter for the APS/BPS
- Torque model - torque to fuel quantity conversion - particulate regeneration mode
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
- Variable geometry duty cycle limit 4
- Variable geometry duty cycle limit in regeneration mode
Programinės įrangos identifikatoriai (23)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | — |
1.94.034 | 03L997016R 0279 |
BOSCH EDC17CP14 |
| — | — |
1.00.006 | 03L906022HS 9978 |
BOSCH EDC17CP14 |
| — | — |
1.00.062 | 03L906022BQ 3066 |
BOSCH EDC17CP14 |
| — | — |
1.94.029 | 03L906022LS 6546 |
BOSCH EDC17CP14 |
| — | — |
1.94.007 | 03L997021H 0509 |
BOSCH EDC17CP14 |
| — | — |
1.94.017 | 03L906022MA 9978 |
BOSCH EDC17CP14 |
| — | — |
1.94.053 | 03L906022MA 3611 |
BOSCH EDC17CP14 |
| — | — |
1.94.014 | 03L906022EA 9978 |
BOSCH EDC17CP14 |
| — | — |
1.00.043 | 03L906022HQ 2360 |
BOSCH EDC17CP14 |
| — | — |
1.00.005 | 03L997030R 9983 |
BOSCH EDC17CP14 |
| — | — |
1.94.055 | 03L906022LS 3610 |
BOSCH EDC17CP14 |
| — | — |
1.00.015 | 03L997030A 9983 |
BOSCH EDC17CP14 |
| — | — |
1.00.014 | 03L906022BQ 9978 |
BOSCH EDC17CP14 |
| — | — |
1.00.007 | 03L906022HS 6157 |
BOSCH EDC17CP14 |
| — | — |
1.94.010 | 03L997016T 0281 |
BOSCH EDC17CP14 |
| — | — |
1.00.018 | 03L906022BR 9978 |
BOSCH EDC17CP14 |
| — | — |
1.00.036 | 03L906022BR 3067 |
BOSCH EDC17CP14 |
| — | — |
1.00.018 | 03L906022SQ 7968 |
BOSCH EDC17CP14 |
| — | — |
1.94.007 | 03L906022HQ 3366 |
BOSCH EDC17CP14 |
| — | — |
1.94.012 | 03L997021D 0505 |
BOSCH EDC17CP14 |
| — | — |
1.94.022 | 03L906022LS 9978 |
BOSCH EDC17CP14 |
| — | — |
1.94.019 | 03L906022MA 6547 |
BOSCH EDC17CP14 |
| — | — |
1.94.048 | 03L906022EA 3612 |
BOSCH EDC17CP14 |
Techninės pastabos apie automobilį
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU pastabos
MICRO Infineon Tricore TC1796 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1796 ATTENTION: the ECU can be modified via OBDII with New Genius ONLY after the unlock through the PATCH UNLOCK with New Trasdata. After the unlock it is possible to reprogram the ECU through OBDII port with New Genius. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1796 It is possible to support this ECU via OBDII using NewGenius and protocol FLASH_0506 WITHOUT PERFORMING the unlock patch and starting always from a 16Mbit TOTAL size file. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
