AUDI A3 (8P) MY08 1.4L 16V TFSI 92kW/123HP MED17.5.5

ECU BOSCH MED17.5.5 · 125 CV (92 kW) · 1400 cc · Benzina sovralimentato

ECU duomenų bazėAUDI › AUDI A3 (8P) MY08 1.4L 16V TFSI 92kW/123HP MED17.5.5

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 11 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisA3 (8P) MY08
Variklis1.4L 16V TFSI 92kW/123HP MED17.5.5
Serijinė galia125 CV / 92 kW
Darbinis tūris1400 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisMED17.5.5
Atmintis / EPROMMICRO ST TRICORE - 12032 Kbit - 178000

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Optimal spark timing/MBT
  • Advance correction
  • Height correction for boost pressure
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Compression ratio for turbocharger protection
  • Exhaust gas temperature
  • Gearbox maximum torque allowed
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • High fuel pressure pump limit
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM Limiter 2
  • RPM limiter 3
  • RPM limiter 4
  • RPM Limiter 5
  • RPM limiter - N
  • RPM limiter in Park position
  • RPM limit for ECT sensor
  • Knock detection factor
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Maximum intake manifold pressure
  • Max torque profile
  • Optimal engine moment
  • Relative permissible torque from the pedal position in torque limitation
  • Relative permissible torque from the pedal position in torque limitation - sport/race mode
  • Driver torque request
  • Driver torque request AWD
  • Driver torque request for reverse gear
  • Throttle angle management

Programinės įrangos identifikatoriai (11)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1.94.01903C906016S 7355 BOSCH MED17.5.5
1.94.02903C906016S 8542 BOSCH MED17.5.5
1.94.00903C997016F 2120 BOSCH MED17.5.5
1.94.02303C997016D 0181 BOSCH MED17.5.5
1.94.02403C906016F 5048 BOSCH MED17.5.5
1.94.03303C906016S 4985 BOSCH MED17.5.5
1.94.00803C906016T 9094 BOSCH MED17.5.5
1.94.03703C906016S 5889 BOSCH MED17.5.5
1.94.00403C906016S 9895 BOSCH MED17.5.5
1.94.02903C997016A 8016 BOSCH MED17.5.5
1.94.01403C906016T 8544 BOSCH MED17.5.5

Techninės pastabos apie automobilį

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU pastabos

MICRO Infineon Tricore TC1766 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1796 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata