AUDI A3 (8P) 3.2L V6 24V 188KW/252HP ME7.1.1

ECU BOSCH ME7.1.1 · 256 CV (188 kW) · 3200 cc · Benzina aspirato

ECU duomenų bazėAUDI › AUDI A3 (8P) 3.2L V6 24V 188KW/252HP ME7.1.1

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 33 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisA3 (8P)
Variklis3.2L V6 24V 188KW/252HP ME7.1.1
Serijinė galia256 CV / 188 kW
Darbinis tūris3200 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.1.1
Atmintis / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Air mass flow (diagnostic)
  • Air mass flow

Programinės įrangos identifikatoriai (33)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612012601037378556 1.84.013022906032HP 7788 BOSCH ME7.1.1
02612012611037378557 1.84.014022906032HQ 7789 BOSCH ME7.1.1
02612012621037378558 1.84.005022906032HR 7790 BOSCH ME7.1.1
02612012631037378559 1.84.009022906032HS 7791 BOSCH ME7.1.1
02612015201037382518 1.84.010022906032JF 9407 BOSCH ME7.1.1
02612015221037382328 1.84.003022906032JL 6776 BOSCH ME7.1.1
02612015231037382327 1.84.008022906032JM 6777 BOSCH ME7.1.1
02612015251037383985 1.84.009022906032JP 0538 BOSCH ME7.1.1
02612018101037389084 1.84.004022906032KB 1281 BOSCH ME7.1.1
02612018111037389085 1.84.007022906032KC 1282 BOSCH ME7.1.1
02612018121037517155 1.84.003022906032KA 1318 BOSCH ME7.1.1
02612080871037369364 1.42.015022906032CA 5629 BOSCH ME7.1.1
02612080871037369032 1.42.024022906032CA 0005 BOSCH ME7.1.1
02612080871037378576 1.42.007022906032CA 8087 BOSCH ME7.1.1
02612080881037378575 1.42.024022906032CB 8088 BOSCH ME7.1.1
02612080881037369383 1.42.019022906032CB 5604 BOSCH ME7.1.1
02612087921037372525 1.42.007022906032GH 7000 BOSCH ME7.1.1
02612087921037374847 1.42.011022906032GH 7001 BOSCH ME7.1.1
02612087921037372163 1.42.005022906032GH 6486 BOSCH ME7.1.1
02612087931037372165 1.42.004022906032GJ 6487 BOSCH ME7.1.1
02612087931037374845 1.42.017022906032GJ 7001 BOSCH ME7.1.1
02612087931037372526 1.42.011022906032GJ 7000 BOSCH ME7.1.1
02612087931037378132 1.42.007022906032GJ 8036 BOSCH ME7.1.1
02612087941037372527 1.42.011022906032GK 7000 BOSCH ME7.1.1
02612087951037374846 1.42.004022906032G 7001 BOSCH ME7.1.1
02612087951037372168 1.42.011022906032GL 6489 BOSCH ME7.1.1
02612087951037374846 1.42.005022906032GL 7001 BOSCH ME7.1.1
02612087951037372528 1.42.006022906032GL 7000 BOSCH ME7.1.1
02612087961037374846 1.42.009022906032GL 7001 BOSCH ME7.1.1
02612089541037378563 1.84.007022906032GP 8192 BOSCH ME7.1.1
02612089541037380565 1.84.012022906032GP 8909 BOSCH ME7.1.1
02612089541037504305 1.84.009022906032GP 9970 BOSCH ME7.1.1
0261S042261037373073 1.84.009022906032LP 2569 BOSCH ME7.1.1

Techninės pastabos apie automobilį

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU pastabos

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata Microprocessor ST10F275
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop