AUDI A3 (8L) 1.9L 8V TDI 66KW/89HP PLCC Motronic

ECU BOSCH MOTRONIC · 90 CV (66 kW) · 1900 cc · Diesel sovralimentato

ECU duomenų bazėAUDI › AUDI A3 (8L) 1.9L 8V TDI 66KW/89HP PLCC Motronic

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 10 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisA3 (8L)
Variklis1.9L 8V TDI 66KW/89HP PLCC Motronic
Serijinė galia90 CV / 66 kW
Darbinis tūris1900 cc
KurasDiesel sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisMOTRONIC
Atmintis / EPROM27C020 DIL32/PLCC32 2Mbit - Eprom 256K x 8

Galimos derinimo operacijos / parinktys:

  • Injection for boost pressure sensor 1
  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • Injection period
  • Injection correction
  • Torque limiter
  • Smoke limiter
  • Pre-injection basic value
  • Air mass flow

Programinės įrangos identifikatoriai (10)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02810014101037355827/828 16 bit 1.01.015 BOSCH MOTRONIC
02810016931037357791/792 16 bit 1.01.011 BOSCH MOTRONIC
02810016931037357319/320 16 bit 1.01.013 BOSCH MOTRONIC
0281001728103735 16 bit 1.01.018 BOSCH MOTRONIC
02810017571037358252/253 16 bit 1.01.013 BOSCH MOTRONIC
02810018471037359496/497 16 bit 1.01.010 BOSCH MOTRONIC
028100184810373XXXXX/X 16 bit 1.01.006 BOSCH MOTRONIC
02810018521037359690/1 16 bit 1.01.013 BOSCH MOTRONIC
02810018521037359223/4 16 bit 1.00.013 BOSCH MOTRONIC
02810102421037352609/610 16 bit 1.01.012 BOSCH MOTRONIC

Techninės pastabos apie automobilį

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU pastabos

2 original EPROM 27C010 or 29F010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. On this epron can be set a KEY.
2 original EPROM 27C010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. On this epron can be set a KEY.