AUDI A3 (8L) 1.8L 20V 92KW/123HP ME7.5

ECU BOSCH ME7.5 · 125 CV (92 kW) · 1800 cc · Benzina aspirato

ECU duomenų bazėAUDI › AUDI A3 (8L) 1.8L 20V 92KW/123HP ME7.5

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 6 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisA3 (8L)
Variklis1.8L 20V 92KW/123HP ME7.5
Serijinė galia125 CV / 92 kW
Darbinis tūris1800 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.5
Atmintis / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Load/throttle position reference - AT
  • Air mass flow

Programinės įrangos identifikatoriai (6)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612069061037354810 1.21.0238D1906018B 0002 BOSCH ME7.5
02612069071037354811 1.21.0108D1906018C 0002 BOSCH ME7.5
02612072211037360102 1.21.0148D1906018F 0001 BOSCH ME7.5
02612072221037360103 1.21.0058D1906018G 0001 BOSCH ME7.5
02612075341037360907 1.21.01306A906032EE 0001 BOSCH ME7.5
02612076481037362901 1.21.01206A906032JF 0002 BOSCH ME7.5

Techninės pastabos apie automobilį

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU pastabos

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.