Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
1 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | ANTONIO CARRARO |
| Modelis | SERIE A |
| Variklis | AV-LB 2.85 2.8L 55kW/74HP MD1CS069 |
| Serijinė galia | 75 CV / 55 kW |
| Darbinis tūris | 2800 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Tractor |
ECU
| Gamintojas | BOSCH |
| Modelis | MD1CS069 |
| Atmintis / EPROM | Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte |
Galimos derinimo operacijos / parinktys:
- Boost pressure limiter
- Boost pressure
- Displacement
- Maximum torque limitation at clutch
- Maximum torque limitation at clutch 2
- Desired fuel quantity map for open loop
- Exhaust gas temperature
- Exhaust gas temperature 2
- Engine reference power at crankshaft
- Max CAT temperature threshold for component protection
- Basic torque management at engine cranking
- Injection period
- Injection period 2
- Injection opening time related to inj. pressure
- Injection mass at high temperature
- Injection mass at low temperature
- Maximum fuel quantity for turbine overspeed prevention
- Injection limit - turbocharger protection
- Max injection limit
- Fuel quantity limitation after cold start
- L
- Torque limiter 3
- Torque limiter
- Torque limiter for diagnostic
- PTO torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- MAP - limp home mode
- Maximum absolute effective torque
- Maximum indicated torque
- Maximum engine torque at crank shaft
- Maximum engine power
- Max torque profile
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 2
- Specific injection pressure limiter
- Specific injection pressure limiter for diagnostics
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific injection pressure 2
- Driver torque request at the start
- CAT downstream temperature sensor characterization
- CAT upstream temperature sensor characterization
- DPF downstream temperature sensor characterization
- DPF upstream temperature sensor characterization
- SCR downstream temperature sensor characterization
- SCR upstream temperature sensor characterization
- Turbo upstream temperature sensor characterization
- Torque limiter for for reverse gear
- Torque limiter for EFT sensor
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Torque limiter in recovery mode 3
- Torque limiter in recovery mode 4
- Torque limiter in recovery mode 5
- Torque model - torque to fuel quantity conversion
- Torque model - torque to fuel quantity conversion 3
- Torque model for performance limiter
- Torque model with performance limiter stage 1 is active
- Torque model with performance limiter stage 2 active
- Torque model with performance limiter after coldstart 1 active
- Torque model with performance limiter after coldstart 2 active
- Turbocharger volumetric efficiency
Programinės įrangos identifikatoriai (1)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | P_1738 6.0.1 |
1.67.012 | FIFGER29_KUS |
BOSCH MD1CS069 |
Techninės pastabos apie automobilį
OBD placed behind the seat, on the driver's right or left side.Visible or hidden by a plastic lid.
ECU located on or behind the engine block. It may be necessary to remove the engine cover. Difficulty: easy.
ECU pastabos
Micro Infineon Tricore TC299TP This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
