ALFA ROMEO MiTo 1.4L 16V TB 88kW/118HP ME7.9.10

ECU BOSCH ME7.9.10 · 120 CV (88 kW) · 1400 cc · Benzina sovralimentato

ECU duomenų bazėALFA ROMEO › ALFA ROMEO MiTo 1.4L 16V TB 88kW/118HP ME7.9.10

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 4 programinės įrangos versijos

Transporto priemonės duomenys

MarkėALFA ROMEO
ModelisMiTo
Variklis1.4L 16V TB 88kW/118HP ME7.9.10
Serijinė galia120 CV / 88 kW
Darbinis tūris1400 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.9.10
Atmintis / EPROMMICRO ST - 6656 Kbit

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Spark advance correction for ECT sensor
  • Advance correction
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure
  • Load / throttle position reference
  • Injection at full throttle
  • Torque limiter 2
  • Advance limiter
  • Torque limiter
  • RPM Limiter
  • Knock detection factor
  • Speed limiter
  • Air mass flow
  • Overboost timing

Programinės įrangos identifikatoriai (4)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
0261S046651037399993 1.91.025 BOSCH ME7.9.10
0261S051421037399275 1.91.016 BOSCH ME7.9.10
0261S051421037509017 1.91.018 BOSCH ME7.9.10
0261S074151037521298 1.91.009 BOSCH ME7.9.10

Techninės pastabos apie automobilį

ECU located on or behind the engine block. It may be necessary to remove the engine cover. Difficulty: easy.
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU pastabos

Microprocessor ST10F275 This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Microprocessor ST10F275 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata