ALFA ROMEO 147 2.0L 16V TS 110kW/148HP ME7.3.1

ECU BOSCH ME7.3.1 · 150 CV (11 kW) · 2000 cc · Benzina aspirato

ECU duomenų bazėALFA ROMEO › ALFA ROMEO 147 2.0L 16V TS 110kW/148HP ME7.3.1

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 13 programinės įrangos versijos

Transporto priemonės duomenys

MarkėALFA ROMEO
Modelis147
Variklis2.0L 16V TS 110kW/148HP ME7.3.1
Serijinė galia150 CV / 11 kW
Darbinis tūris2000 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.3.1
Atmintis / EPROMHYBRID ECU - 4.096Kbit 0x80000

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Speed limiter
  • Load/throttle position reference - AT
  • Air mass flow

Programinės įrangos identifikatoriai (13)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612018751037387469 1.38.012 BOSCH ME7.3.1
02612067071277356512 1.38.02810A0Xw00 BOSCH ME7.3.1
02612067071277356443 1.38.007 BOSCH ME7.3.1
02612067081277356576 1.38.00310A0Xw00 BOSCH ME7.3.1
02612067081277356444 1.38.007 BOSCH ME7.3.1
02612067081277356526 1.38.011 BOSCH ME7.3.1
02612067081277356576 1.38.009 BOSCH ME7.3.1
02612073361277356479 1.38.00309a51x00 BOSCH ME7.3.1
02612073361277356521 1.38.002 BOSCH ME7.3.1
02612073371277356519 1.38.003 BOSCH ME7.3.1
02612073771277356477 1.38.00809a51x00 BOSCH ME7.3.1
02612077251037351952 1.38.01010A0Xw00 BOSCH ME7.3.1
02612086101037369622 1.38.004 BOSCH ME7.3.1

Techninės pastabos apie automobilį

ECU located in the engine bay on the driver'side. Difficulty: easy.
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU pastabos

HYBRID ECU! To modify this ECU you need our serial protocol FLASH_0018. Please read the manual handbook to connect the specific cable. WARNING!! ECU ME7 - IX/CL = injection at full load, decrease the values to enrich the injection Note for the SELESPEED version: before disconnecting the ECU make sure that the gearbox is in idle position to avoid car blockage. In that case use the Examiner. If after a correct modification a fault code appears, simply turn on the engine and the fault will be reset automatically after some starts. This Setting File can be used for serial system : Genius or NewGenius.

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop