VOLVO TRUCK FH MK I VERSION 98 380 12L 280kW/375HP LUCAS

ECU LUCAS PLCC 28HC256 · 380 CV (28 kW) · 12000 cc · Diesel sovralimentato

ECU 数据库VOLVO TRUCK › VOLVO TRUCK FH MK I VERSION 98 380 12L 280kW/375HP LUCAS

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 27 固件版本

车辆数据

品牌VOLVO TRUCK
型号FH MK I VERSION 98
发动机380 12L 280kW/375HP LUCAS
原厂功率380 CV / 28 kW
排量12000 cc
燃料Diesel sovralimentato
车辆类型Tir

ECU

制造商LUCAS
型号PLCC 28HC256
存储 / EPROM28HC256 PLCC32 256Kbit - EEprom 32K x 8

可用的调校选项:

  • Injection at idle speed
  • Injection at part load
  • Injection at full throttle
  • Torque limiter 2
  • Torque limiter
  • Smoke limiter at idle speed
  • Smoke limiter at part load
  • Smoke limiter at full throttle

固件标识 (27)

硬件号软件号 (chip)版本升级软件ECU
03161952XXXX3169 1.55.003 LUCAS PLCC 28HC256
03161952XXXX3084 1.55.115 LUCAS PLCC 28HC256
03161952XXXX3217 1.55.006 LUCAS PLCC 28HC256
03161962XXXX1482 1.55.003 LUCAS PLCC 28HC256
03161962XXXX4639 1.55.007 LUCAS PLCC 28HC256
03161962XXXX4563 1.55.005 LUCAS PLCC 28HC256
03161962XXXX3297 1.55.109 LUCAS PLCC 28HC256
03161962XXXX9625 1.55.108 LUCAS PLCC 28HC256
03161962XXXX4923 1.55.106 LUCAS PLCC 28HC256
03161962XXXX3084 1.55.006 LUCAS PLCC 28HC256
08170700XXXX3297 1.55.002 LUCAS PLCC 28HC256
08170700XXXX3009 1.55.005 LUCAS PLCC 28HC256
08170700XXXX3084 1.55.109 LUCAS PLCC 28HC256
08170700XXXX3084 1.55.114 LUCAS PLCC 28HC256
08170700XXXX3038 1.55.115 LUCAS PLCC 28HC256
08170700XXXX3083 1.55.003 LUCAS PLCC 28HC256
20412506XXXX3084 1.55.005 LUCAS PLCC 28HC256
20412506XXXX3297 1.55.108 LUCAS PLCC 28HC256
20412506XXXX1P01 1.55.003 LUCAS PLCC 28HC256
20577131XXXX3084 1.55.004 LUCAS PLCC 28HC256
20577131XXXX0980 1.55.003 LUCAS PLCC 28HC256
20577131XXXX3075 1.55.002 LUCAS PLCC 28HC256
20577131XXXX1482 1.55.005 LUCAS PLCC 28HC256
20582958XXXX8249 1.55.006 LUCAS PLCC 28HC256
20582958XXXX3152 1.55.002 LUCAS PLCC 28HC256
20582958XXXX2069 1.55.003 LUCAS PLCC 28HC256
20582958XXXX3072 1.55.004 LUCAS PLCC 28HC256

ECU 说明

Original EPROM 28HC256 PLCC 32 pins This Setting File can be used for serial system NewGenius. To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". On this epron can be set a KEY.