SKODA SUPERB (B6) 1.4L 16V TSI 92kW/123HP MED17.5.5 — ECU BOSCH MED17.5

查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 5 固件版本

获取该车辆的文件

购买文件（原始或改写）在 mastertuningfile.com 注册并订购文件

车辆数据

品牌	SKODA
型号	SUPERB (B6)
发动机	1.4L 16V TSI 92kW/123HP MED17.5.5
原厂功率	125 CV / 92 kW
排量	1400 cc
燃料	Benzina sovralimentato
车辆类型	Auto

ECU

制造商	BOSCH
型号	MED17.5
存储 / EPROM	MICRO ST TRICORE - 12032 Kbit - 178000

可用的调校选项:

Base timing
Optimal spark timing/MBT
Advance correction
Height correction for boost pressure
Desired engine load calculation
Lambda correction for engine temperature after starting
Compression ratio for turbocharger protection
Compression ratio limiting for compressor depending on IAT sensor
Exhaust gas temperature
Gearbox maximum torque allowed
High pressure fuel pump setpoint
High fuel pressure pump limit for ECT sensor
High pressure fuel pump setpoint - limp home mode
High-pressure fuel pump - in catalyst heating monitoring mode
Lambda enrichment for components protection
Lambda correction for exhaust manifold temperature
RPM Limiter
Knock detection factor
Throttle air mass flow calculation
Manifold absolute pressure time delay
Characteristic manifold absolute pressure time constant of the LRS
Maximum intake manifold pressure
Max torque profile
Optimal engine moment
Relative permissible torque from the pedal position in torque limitation
Relative permissible torque from the pedal position in torque limitation - sport/race mode
Driver torque request
Driver torque request AWD
Driver torque request for reverse gear
Throttle angle management

固件标识 (5)

硬件号	软件号 (chip)	版本	升级软件	ECU
—	—	1.94.002	03C906016AQ 9061	BOSCH MED17.5
—	—	1.94.013	03C906016AL 5294	BOSCH MED17.5.5
—	—	1.94.007	03C906016AQ 9970	BOSCH MED17.5.5
—	—	1.94.010	03C906016CM 1988	BOSCH MED17.5.5
0261S04376	1037397234	1.94.014	03C906016C 2736	BOSCH MED17.5.5

ECU 说明

MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata WARNING! ECU MED9 - IX/CL = injection at full load, decrease the values to enrich the injection

MICRO Infineon Tricore TC1766 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata