SEAT LEON (1M) 1.8L 20V TURBO 110kW/150HP ME7.5

ECU BOSCH ME7.5 · 150 CV (11 kW) · 1800 cc · Benzina sovralimentato

ECU 数据库SEAT › SEAT LEON (1M) 1.8L 20V TURBO 110kW/150HP ME7.5

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 9 固件版本

车辆数据

品牌SEAT
型号LEON (1M)
发动机1.8L 20V TURBO 110kW/150HP ME7.5
原厂功率150 CV / 11 kW
排量1800 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.5
存储 / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

可用的调校选项:

  • Base timing
  • Optimal spark timing/MBT
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure limiter 3
  • Boost pressure limit control
  • Height correction for boost pressure
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Lambda enrichment for components protection
  • RPM Limiter 2
  • Boost pressure linearization
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Maximum boost pressure load
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Offset tolerance depending on permissible torque
  • Relative permissible torque from the pedal position in torque limitation
  • Maximum pressure ratio limit depending on temperature
  • Driver torque request
  • Driver torque request Sport mode
  • Throttle angle management
  • Variable intake pulsation correction

固件标识 (9)

硬件号软件号 (chip)版本升级软件ECU
02612065451037352761 1.21.02406A906032T 0003 BOSCH ME7.5
02612065511037352772 1.21.01806A906032BE 0001 BOSCH ME7.5
02612068661037360165 1.21.03106A906032DE 0001 BOSCH ME7.5
02612068861037360295 1.21.01006A906032DE 0002 BOSCH ME7.5
02612074401037360646 1.21.03306A906032HN 0001 BOSCH ME7.5
02612074401037363908 1.42.02706A906032HN 0002 BOSCH ME7.5
02612074461037362280 1.21.01406A906032HS 0002 BOSCH ME7.5
02612081151037366379 1.42.03006A906032MJ 0003 BOSCH ME7.5
02612085311037369040 1.42.02806A906032SJ 0010 BOSCH ME7.5

ECU 说明

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius.